IPQ5018 has SDI (Secure Debug Image) enabled by TZ by default, and that
means that WDT being asserted or just trying to reboot will hang the board
in the debug mode and only pulling the power and repowering will help.
Some IPQ4019 boards like Google WiFI have it enabled as well.
So, lets add a boolean property to indicate that SDI should be disabled.
Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
---
Documentation/devicetree/bindings/firmware/qcom,scm.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
index 4233ea839bfc..bf753192498a 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml
@@ -89,6 +89,14 @@ properties:
protocol to handle sleeping SCM calls.
maxItems: 1
+ qcom,sdi-disable:
+ description:
+ Indicates that the SDI (Secure Debug Image) has been enabled by TZ
+ by default and it needs to be disabled.
+ If not disabled WDT assertion or reboot will cause the board to hang
+ in the debug mode.
+ type: boolean
+
qcom,dload-mode:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
--
2.41.0
