[PATCH v3] PCI: xilinx-nwl: Remove unnecessary code which updates primary, secondary and sub-ordinate bus numbers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The primary,secondary and sub-ordinate bus number registers are updated by
Linux PCI core, so remove code which updates respective fields of type 1
header.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@xxxxxxx>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xxxxxxx>
---
changes in v4:
- None
changes in v3:
- Remove unnecessary period at end of subject line.
- Updated commit message.
changes in v2:
- Code increasing ECAM Size value is added into a seperate patch.
- Modified commit messages.
changes in v1:
- Modified commit messages.
---
 drivers/pci/controller/pcie-xilinx-nwl.c | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 176686bdb15c..d8a3a08be1d5 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -166,7 +166,6 @@ struct nwl_pcie {
 	int irq_intx;
 	int irq_misc;
 	u32 ecam_value;
-	u8 last_busno;
 	struct nwl_msi msi;
 	struct irq_domain *legacy_irq_domain;
 	struct clk *clk;
@@ -625,7 +624,7 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
 {
 	struct device *dev = pcie->dev;
 	struct platform_device *pdev = to_platform_device(dev);
-	u32 breg_val, ecam_val, first_busno = 0;
+	u32 breg_val, ecam_val;
 	int err;
 
 	breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
@@ -683,15 +682,6 @@ static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
 	nwl_bridge_writel(pcie, upper_32_bits(pcie->phys_ecam_base),
 			  E_ECAM_BASE_HI);
 
-	/* Get bus range */
-	ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
-	pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
-	/* Write primary, secondary and subordinate bus numbers */
-	ecam_val = first_busno;
-	ecam_val |= (first_busno + 1) << 8;
-	ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
-	writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
-
 	if (nwl_pcie_link_up(pcie))
 		dev_info(dev, "Link is UP\n");
 	else
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux