Re: [PATCH (resend)] mailbox: Add Altera mailbox driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Ley Foon,

On 12/16/2014 12:33 AM, Ley Foon Tan wrote:
> On Tue, Dec 16, 2014 at 4:54 AM, Suman Anna <s-anna@xxxxxx> wrote:
>> Hi Ley Foon,
>>
>> On 12/12/2014 08:38 AM, Dinh Nguyen wrote:
>>>
>>>
>>> On 12/12/14, 4:04 AM, Ley Foon Tan wrote:
>>>> The Altera mailbox allows for interprocessor communication. It supports
>>>> only one channel and work as either sender or receiver.
>>
>> I have a few more comments in addition to those that Dinh provided.
>>
>>>>
>>>> Signed-off-by: Ley Foon Tan <lftan@xxxxxxxxxx>
>>>> ---
>>>>  .../devicetree/bindings/mailbox/altera-mailbox.txt |  49 +++
>>>>  drivers/mailbox/Kconfig                            |   6 +
>>>>  drivers/mailbox/Makefile                           |   2 +
>>>>  drivers/mailbox/mailbox-altera.c                   | 404 +++++++++++++++++++++
>>>>  4 files changed, 461 insertions(+)
>>>>  create mode 100644 Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
>>>>  create mode 100644 drivers/mailbox/mailbox-altera.c
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
>>>> new file mode 100644
>>>> index 0000000..c261979
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt
>>>> @@ -0,0 +1,49 @@
>>>> +Altera Mailbox Driver
>>>> +=====================
>>>> +
>>>> +Required properties:
>>>> +- compatible :      "altr,mailbox-1.0".
>>
>> I am not sure on this convention, sounds like IP version number. Please
>> check this with a DT maintainer.
> Our other soft IPs compatible strings all have 1.0 version number. Eg:
> altr,juart-1.0.
> So, we want to keep it as same format.
> 
>>>> diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig
>>>> index c04fed9..84325f2 100644
>>>> --- a/drivers/mailbox/Kconfig
>>>> +++ b/drivers/mailbox/Kconfig
>>>> @@ -45,4 +45,10 @@ config PCC
>>>>        states). Select this driver if your platform implements the
>>>>        PCC clients mentioned above.
>>>>
>>>> +config ALTERA_MBOX
>>>> +    tristate "Altera Mailbox"
>>
>> You haven't used any depends on here, this driver is not applicable on
>> all platforms, right?
> It is a soft IP, so it is not limited to our platform only.
> Other soft IP drivers also don't have 'depend on', so I think should be fine.

Yeah, ok.

> 
> 
>>>> +
>>>> +static inline struct altera_mbox *to_altera_mbox(struct mbox_chan *chan)
>>>> +{
>>>> +    if (!chan)
>>>> +            return NULL;
>>>> +
>>>> +    return container_of(chan, struct altera_mbox, chan);
>>>> +}
>>>> +
>>>> +static inline int altera_mbox_full(struct altera_mbox *mbox)
>>>> +{
>>>> +    u32 status;
>>>> +
>>>> +    status = __raw_readl(mbox->mbox_base + MAILBOX_STS_REG);
>>
>> You may want to replace all the __raw_readl/__raw_writel with regular
>> readl/writel or its equivalent relaxed versions depending on your needs.
> Okay.
> 
> 
>>>> +static int altera_mbox_send_data(struct mbox_chan *chan, void *data)
>>>> +{
>>>> +    struct altera_mbox *mbox = to_altera_mbox(chan);
>>>> +    u32 *udata = (u32 *)data;
>>>> +
>>>> +    if (!mbox || !data)
>>>> +            return -EINVAL;
>>>> +    if (!mbox->is_sender) {
>>>> +            dev_warn(mbox->dev,
>>>> +                    "failed to send. This is receiver mailbox.\n");
>>>> +            return -EINVAL;
>>>> +    }
>>>> +
>>>> +    if (altera_mbox_full(mbox))
>>>> +            return -EBUSY;
>>
>> I think this logic in general will conflict between interrupt and poll
>> mode. send_data is supposed to return -EBUSY only in polling mode and
>> not in interrupt mode.
> What is the recommended error code for this case? BTW, omap-mailbox.c
> also return -EBUSY if mailbox is full.

Looks like the mbox core doesn't care about the error, it's just
checking for non-success case. I made that comment based on the
documentation in last_tx_done. OMAP mailbox is always interrupt driven,
and it is very rare that we will ever hit the mbox full because of the
Tx-ready interrupt driven Tx ticker and also the h/w fifo.

I see that your mailbox is very similar to OMAP mailbox though without
the h/w fifo, but you do have support for both polling and interrupt
modes in your code. OMAP mailbox can do that as well, but it's
inefficient to use polling so the driver is strictly interrupt driven.

> 
>>>> +
>>>> +    /* Enable interrupt before send */
>>>> +    altera_mbox_tx_intmask(mbox, true);
>>
>> Is this true and required in Polling mode too?
> Add checking for interrupt mode here.
> 
> 
>>
>> Do you even need the chans variable, don't see it getting used
>> anywhere. You are directly using the mbox->chan during registration..
> Will update this.
>>
>>>
>>>> +    struct resource *regs;
>>>> +    int ret;
>>>> +
>>>> +    mbox = devm_kzalloc(&pdev->dev, sizeof(struct altera_mbox),
>>
>> Use sizeof(*mbox)
> Okay.
> 
>>
>>>> +            GFP_KERNEL);
>>
>> You have a few "Alignment should match open parenthesis" checks
>> generated with the --strict option on checkpatch. I am not sure if Jassi
>> is requiring them, but I would recommend that you fix all of them.
> Okay, will check these.
> 
>>
>>>> +    if (!mbox)
>>>> +            return -ENOMEM;
>>>> +
>>>> +    regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>>> +    if (!regs)
>>>> +            return -ENXIO;
>>
>> You can remove the check for regs, devm_ioremap_resource is capable
>> of handling the error.
> Okay.
> 
>>>> +
>>>> +    mbox->mbox_base = devm_ioremap_resource(&pdev->dev, regs);
>>>> +    if (IS_ERR(mbox->mbox_base))
>>>> +            return PTR_ERR(mbox->mbox_base);
>>>> +
>>>> +    /* Check is it a sender or receiver? */
>>>> +    mbox->is_sender = altera_mbox_is_sender(mbox);
>>>> +
>>>> +    mbox->irq = platform_get_irq(pdev, 0);
>>>> +    if (mbox->irq >= 0)
>>>> +            mbox->intr_mode = true;
>>
>> This seems to be a poor way of setting up the mode. Is it the same IP
>> block but different integration on different SoCs? Or on the same SoC,
>> and you can use it either by interrupt driven or by polling.
> Yes, it can use interrupt or polling mode depends on hardware configurations.
> It is a soft IP and can be configured with different hardware configurations.

OK, the platform_get_irq suggests that this decision is made by having
or not having the interrupts property in the DT node, is that the only
way of differentiating this mode?

regards
Suman

> 
>>>> +
>>>> +    mbox->dev = &pdev->dev;
>>>> +
>>>> +    /* Hardware supports only one channel. */
>>>> +    chans[0] = &mbox->chan;
>>>> +    mbox->controller.dev = mbox->dev;
>>>> +    mbox->controller.num_chans = 1;
>>>> +    mbox->controller.chans =  &mbox->chan;
>>>> +    mbox->controller.ops = &altera_mbox_ops;
>>>> +
>>>> +    if (mbox->is_sender) {
>>>> +            if (mbox->intr_mode)
>>>> +                    mbox->controller.txdone_irq = true;
>>>> +            else {
>>>> +                    mbox->controller.txdone_poll = true;
>>>> +                    mbox->controller.txpoll_period = MBOX_POLLING_MS;
>>>> +            }
>>>
>>> Need braces around the if as well.
>>>
>>>> +    }
>>>> +
>>>> +    ret = mbox_controller_register(&mbox->controller);
>>>> +    if (ret) {
>>>> +            dev_err(&pdev->dev, "Register mailbox failed\n");
>>>> +            goto err;
>>>> +    }
>>>> +
>>>> +    platform_set_drvdata(pdev, mbox);
>>>> +    return 0;
>>
>> Not required, ret should be 0 if mbox_controller_register succeeds.
> Okay.
>>
>>>> +err:
>>>> +    return ret;
>>>> +}
>>>> +
>>>> +static int altera_mbox_remove(struct platform_device *pdev)
>>>> +{
>>>> +    struct altera_mbox *mbox = platform_get_drvdata(pdev);
>>>> +
>>>> +    if (!mbox)
>>>> +            return -EINVAL;
>>>> +
>>>> +    mbox_controller_unregister(&mbox->controller);
>>>> +
>>>> +    platform_set_drvdata(pdev, NULL);
>>
>> This is not required.
> Okay.
>>
>>>> +    return 0;
>>>> +}
>>>> +
>>>> +static const struct of_device_id altera_mbox_match[] = {
>>>> +    { .compatible = "altr,mailbox-1.0" },
>>>> +    { /* Sentinel */ }
>>>> +};
>>>> +
>>>> +MODULE_DEVICE_TABLE(of, altera_mbox_match);
>>>> +
>>>> +static struct platform_driver altera_mbox_driver = {
>>>> +    .probe  = altera_mbox_probe,
>>>> +    .remove = altera_mbox_remove,
>>>> +    .driver = {
>>>> +            .name   = DRIVER_NAME,
>>>> +            .owner  = THIS_MODULE,
>>>> +            .of_match_table = altera_mbox_match,
>>
>> of_match_ptr(altera_mbox_match).
> Okay.
>>
>>>> +    },
>>>> +};
>>>> +
>>>> +static int altera_mbox_init(void)
>>>> +{
>>>> +    return platform_driver_register(&altera_mbox_driver);
>>>> +}
>>>> +
>>>> +static void altera_mbox_exit(void)
>>>> +{
>>>> +    platform_driver_unregister(&altera_mbox_driver);
>>>> +}
>>
>> Use module_platform_driver here as you are using just regular platform
>> driver register and unregister.
>>
> Okay.
> 
> Thanks for reviewing.
> 
> Regards.
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux