Re: [PATCH 2/4] dt-bindings: net: dsa: document internal MDIO bus

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13.08.2023 14:15, Vladimir Oltean wrote:
On Sat, Aug 12, 2023 at 12:17:06PM +0300, Arınç ÜNAL wrote:
Add the schema to document the internal MDIO bus. Adjust realtek.yaml
accordingly.

Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
  .../devicetree/bindings/net/dsa/dsa.yaml      | 18 +++++
  .../devicetree/bindings/net/dsa/realtek.yaml  | 66 +++++++++----------
  2 files changed, 50 insertions(+), 34 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
index ec74a660beda..03ccedbc49dc 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml
@@ -31,6 +31,24 @@ properties:
        (single device hanging off a CPU port) must not specify this property
      $ref: /schemas/types.yaml#/definitions/uint32-array
+ mdio:
+    description: The internal MDIO bus of the switch
+    $ref: /schemas/net/mdio.yaml#
+
+if:
+  required: [ mdio ]
+then:
+  patternProperties:
+    "^(ethernet-)?ports$":
+      patternProperties:
+        "^(ethernet-)?port@[0-9]+$":
+          if:
+            not:
+              required: [ ethernet ]

To match only on user ports, this must also exclude DSA ports ("required: [ link ]").

+          then:
+            required:
+              - phy-handle

No. The only thing permitted by the slave_mii_bus is to do something meaningful
when phylink bindings ("phy-handle", "fixed-link" or "managed") are absent. But
the presence of slave_mii_bus does not imply that user ports have a required
phy-handle. They might be SerDes ports or xMII ports. So they might use "managed"
or "fixed-link". The only thing that you can enforce is that, if the slave_mii_bus
has an OF presence, then user ports must have phylink bindings.

Got it. This should be the correct schema then. I don't check for ethernet
or link as when the mdio property is used, these bindings apply to all
ports. DSA and CPU ports are then further restricted with the dsa-port.yaml
schema.

if:
  required: [ mdio ]
then:
  patternProperties:
    "^(ethernet-)?ports$":
      patternProperties:
        "^(ethernet-)?port@[0-9]+$":
          oneOf:
            - required:
                - fixed-link
            - required:
                - phy-handle
            - required:
                - managed

Arınç



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux