On Sat, Aug 12, 2023 at 12:17:05PM +0300, Arınç ÜNAL wrote: > The port@5 node on the example is missing the ethernet property. Add it. > Remove the MAC bindings on the example as they cannot be validated. > > Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx> > --- > .../bindings/net/dsa/microchip,lan937x.yaml | 11 +---------- > 1 file changed, 1 insertion(+), 10 deletions(-) > > diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml > index 8d7e878b84dc..49af4b0d5916 100644 > --- a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml > @@ -68,16 +68,6 @@ examples: > - | > #include <dt-bindings/gpio/gpio.h> > > - macb0 { > - #address-cells = <1>; > - #size-cells = <0>; > - > - fixed-link { > - speed = <1000>; > - full-duplex; > - }; > - }; > - > spi { > #address-cells = <1>; > #size-cells = <0>; > @@ -138,6 +128,7 @@ examples: > phy-mode = "rgmii"; > tx-internal-delay-ps = <2000>; > rx-internal-delay-ps = <2000>; > + ethernet = <&macb1>; macb1 instead of macb0: was it intentional? > > fixed-link { > speed = <1000>; > -- > 2.39.2 >