The Devicespec specification skips over handling of a logical view of the memory map, pointing users to the UEFI specification. It is common to split firmware into 'Platform Init', which does the initial hardware setup and a "Payload" which selects the OS to be booted. Thus an handover interface is required between these two pieces. Where UEFI boot-time services are not available, but UEFI firmware is present on either side of this interface, information about memory usage and attributes must be presented to the "Payload" in some form. This aims to provide an initial schema for this mapping. Note that this is separate from the existing /memory and /reserved-memory nodes, since it is mostly concerned with what the memory is used for. It may cover only a small fraction of available memory, although it could be used to signal which area of memory has ECC. For now, no attempt is made to create an exhaustive binding, but this can be completed once this has passed initial review. Signed-off-by: Simon Glass <sjg@xxxxxxxxxxxx> --- dtschema/schemas/memory-map.yaml | 51 ++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 dtschema/schemas/memory-map.yaml diff --git a/dtschema/schemas/memory-map.yaml b/dtschema/schemas/memory-map.yaml new file mode 100644 index 0000000..97e531e --- /dev/null +++ b/dtschema/schemas/memory-map.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: BSD-2-Clause +# Copyright 2023 Google LLC +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-map.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: /memory-map nodes +description: | + Common properties always required in /memory-map nodes. These nodes are + intended to resolve the nonchalant clause 3.4.1 ("/memory node and UEFI") + in the Devicetree Specification. + +maintainers: + - Simon Glass <sjg@xxxxxxxxxxxx> + +properties: + $nodename: + const: '/' + usage: + $ref: /schemas/types.yaml#/definitions/string + description: | + Describes the usage of the memory region, e.g.: + + "acpi-reclaim", "acpi-nvs", "bootcode", "bootdata", "bootdata", + "runtime-code", "runtime-data" + attr: + $ref: /schemas/types.yaml#/definitions/string-array + description: | + Attributes possessed by this memory region: + + "single-bit-ecc" - supports single-bit ECC + "multi-bit-ecc" - supports multiple-bit ECC + "no-ecc" - non-ECC memory + +patternProperties: + "^([a-z][a-z0-9\\-]+@[0-9a-f]+)?$": + type: object + additionalProperties: false + + properties: + reg: + minItems: 1 + maxItems: 1024 + + required: + - reg + +additionalProperties: true + +... -- 2.41.0.694.ge786442a9b-goog
