[PATCH v4 1/3] arm64: dts: ti: k3-j784s4: Add phase tags marking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



bootph-all as phase tag was added to dt-schema
(dtschema/schemas/bootph.yaml) to cover U-Boot challenges with DT.
That's why add it also to Linux to be aligned with bootloader requirement.

On TI K3 J784S4 SoC, only secure_proxy_mcu and secure_proxy_sa3 nodes are
exclusively used by R5 bootloader, rest of the dts nodes with bootph-* are
used by later boot stages also.

And secure_proxy_mcu and secure_proxy_sa3 are disabled in kernel device
tree, and will be only enabled in R5 bootloader device tree.
So, bootph-pre-ram for secure_proxy_mcu and secure_proxy_sa3 will be
added in R5 bootloader device tree only.

Add bootph-all for all other nodes that are used in the bootloader on
K3 J784S4 SoC, and bootph-pre-ram is not needed specifically for any node
in kernel dts.

Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
---
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi       | 2 ++
 arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 9 +++++++++
 arch/arm64/boot/dts/ti/k3-j784s4.dtsi            | 2 ++
 3 files changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index a04c44708a09..65eca0990300 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -670,6 +670,7 @@ main_sdhci1: mmc@4fb0000 {
 	};
 
 	main_navss: bus@30000000 {
+		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -705,6 +706,7 @@ main_udmass_inta: msi-controller@33d00000 {
 		};
 
 		secure_proxy_main: mailbox@32c00000 {
+			bootph-all;
 			compatible = "ti,am654-secure-proxy";
 			#mbox-cells = <1>;
 			reg-names = "target_data", "rt", "scfg";
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 740ee794d7b9..a394bef093b6 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -7,6 +7,7 @@
 
 &cbass_mcu_wakeup {
 	sms: system-controller@44083000 {
+		bootph-all;
 		compatible = "ti,k2g-sci";
 		ti,host-id = <12>;
 
@@ -19,22 +20,26 @@ sms: system-controller@44083000 {
 		reg = <0x00 0x44083000 0x00 0x1000>;
 
 		k3_pds: power-controller {
+			bootph-all;
 			compatible = "ti,sci-pm-domain";
 			#power-domain-cells = <2>;
 		};
 
 		k3_clks: clock-controller {
+			bootph-all;
 			compatible = "ti,k2g-sci-clk";
 			#clock-cells = <2>;
 		};
 
 		k3_reset: reset-controller {
+			bootph-all;
 			compatible = "ti,sci-reset";
 			#reset-cells = <2>;
 		};
 	};
 
 	chipid@43000014 {
+		bootph-all;
 		compatible = "ti,am654-chipid";
 		reg = <0x00 0x43000014 0x00 0x4>;
 	};
@@ -161,6 +166,7 @@ mcu_timer0: timer@40400000 {
 	};
 
 	mcu_timer1: timer@40410000 {
+		bootph-all;
 		compatible = "ti,am654-timer";
 		reg = <0x00 0x40410000 0x00 0x400>;
 		interrupts = <GIC_SPI 817 IRQ_TYPE_LEVEL_HIGH>;
@@ -442,6 +448,7 @@ mcu_spi2: spi@40320000 {
 	};
 
 	mcu_navss: bus@28380000 {
+		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -451,6 +458,7 @@ mcu_navss: bus@28380000 {
 		dma-ranges;
 
 		mcu_ringacc: ringacc@2b800000 {
+			bootph-all;
 			compatible = "ti,am654-navss-ringacc";
 			reg = <0x00 0x2b800000 0x00 0x400000>,
 			      <0x00 0x2b000000 0x00 0x400000>,
@@ -465,6 +473,7 @@ mcu_ringacc: ringacc@2b800000 {
 		};
 
 		mcu_udmap: dma-controller@285c0000 {
+			bootph-all;
 			compatible = "ti,j721e-navss-mcu-udmap";
 			reg = <0x00 0x285c0000 0x00 0x100>,
 			      <0x00 0x2a800000 0x00 0x40000>,
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
index 8b5974d92e33..4398c3a463e1 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4.dtsi
@@ -228,6 +228,7 @@ pmu: pmu {
 	};
 
 	cbass_main: bus@100000 {
+		bootph-all;
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -263,6 +264,7 @@ cbass_main: bus@100000 {
 			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
 
 		cbass_mcu_wakeup: bus@28380000 {
+			bootph-all;
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux