On 2023/8/10 23:37:13, Conor Dooley wrote: > From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> > > On Thu, 10 Aug 2023 15:46:45 +0800, Samin Guo wrote: >> This patch fixes the StarFive JH7110 gmac TCP RX slow issue. And it has been >> tested on VisionFive 2. >> >> Here is the result of the test (iperf3): >> >> Before: >> # iperf3 -s >> ----------------------------------------------------------- >> Server listening on 5201 (test #1) >> ----------------------------------------------------------- >> Accepted connection from 192.168.1.4, port 47604 >> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612 >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec >> [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec >> [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec >> [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec >> [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec >> [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec >> [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec >> [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec >> [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec >> - - - - - - - - - - - - - - - - - - - - - - - - - >> [ ID] Interval Transfer Bitrate >> [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver >> >> [...] > > Applied to riscv-dt-for-next with the conversion to decimal, thanks! > > [1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration > https://git.kernel.org/conor/c/1273f7e96a70 > > Thanks, > Conor. Hi Conor， Thank a lot for for merging into the next branch so promptly！ Best regards, Samin
