Re: [PATCH 2/3] arm64: dts: ti: k3-j7200: Add the supported frequencies for A72

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/10/2023 6:23 PM, Nishanth Menon wrote:
On 17:23-20230810, Kumar, Udit wrote:
[..]
+		opp1-750000000 {
+			opp-hz = /bits/ 64 <750000000>;
   		};
   	};
--
2.34.1

[..]
This wont work:

a) in u-boot's falcon boot mode and puts unrelated responsibility to
bootloader (u-boot is not the only bootloader in the party here).
b) Further, the reason for doing the opp detection in the kernel is
due to the severity of consequence of attempting to run a lower rated
chip at higher frequency - PoH (Power on Hours) or physical damage can
result.
c) Finally, in a virtualized environment: TISCI will get DM (Device
Manager) to arbitrate between the each of the VM's request, but if
the VM's are'nt self sufficient, we will have DM making wrong choices
resulting in (b) condition again.

This is the reason why drivers/cpufreq/ti-cpufreq.c exists and all SoCs
that have OPPs from TI is handled in the kernel itself.

Thanks to pointing to this driver.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux