On Thu, 10 Aug 2023 19:54:18 +0800, Luo Jie wrote: > QCA8386/QCA8084 includes the clock & reset controller that is > accessed by MDIO bus. Two work modes are supported, qca8386 works > as switch mode, qca8084 works as PHY mode. > > Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx> > --- > .../bindings/clock/qcom,qca8k-nsscc.yaml | 79 ++++++++++++++ > include/dt-bindings/clock/qcom,qca8k-nsscc.h | 101 ++++++++++++++++++ > include/dt-bindings/reset/qcom,qca8k-nsscc.h | 75 +++++++++++++ > 3 files changed, 255 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/qcom,qca8k-nsscc.yaml > create mode 100644 include/dt-bindings/clock/qcom,qca8k-nsscc.h > create mode 100644 include/dt-bindings/reset/qcom,qca8k-nsscc.h > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810115419.25539-3-quic_luoj@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
