On Thu, Aug 10, 2023 at 03:46:46PM +0800, Samin Guo wrote:
> Fixed configuration to improve the speed of TCP RX.
>
> Before:
> # iperf3 -s
> -----------------------------------------------------------
> Server listening on 5201 (test #1)
> -----------------------------------------------------------
> Accepted connection from 192.168.1.4, port 47604
> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
> [ ID] Interval Transfer Bitrate
> [ 5] 0.00-1.00 sec 36.3 MBytes 305 Mbits/sec
> [ 5] 1.00-2.00 sec 35.6 MBytes 299 Mbits/sec
> [ 5] 2.00-3.00 sec 36.5 MBytes 306 Mbits/sec
> [ 5] 3.00-4.00 sec 36.5 MBytes 306 Mbits/sec
> [ 5] 4.00-5.00 sec 35.7 MBytes 300 Mbits/sec
> [ 5] 5.00-6.00 sec 35.4 MBytes 297 Mbits/sec
> [ 5] 6.00-7.00 sec 37.1 MBytes 311 Mbits/sec
> [ 5] 7.00-8.00 sec 35.6 MBytes 298 Mbits/sec
> [ 5] 8.00-9.00 sec 36.4 MBytes 305 Mbits/sec
> [ 5] 9.00-10.00 sec 36.3 MBytes 304 Mbits/sec
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval Transfer Bitrate
> [ 5] 0.00-10.00 sec 361 MBytes 303 Mbits/sec receiver
>
> After:
> # iperf3 -s
> -----------------------------------------------------------
> Server listening on 5201 (test #1)
> -----------------------------------------------------------
> Accepted connection from 192.168.1.4, port 47710
> [ 5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720
> [ ID] Interval Transfer Bitrate
> [ 5] 0.00-1.00 sec 111 MBytes 932 Mbits/sec
> [ 5] 1.00-2.00 sec 111 MBytes 934 Mbits/sec
> [ 5] 2.00-3.00 sec 111 MBytes 934 Mbits/sec
> [ 5] 3.00-4.00 sec 111 MBytes 934 Mbits/sec
> [ 5] 4.00-5.00 sec 111 MBytes 934 Mbits/sec
> [ 5] 5.00-6.00 sec 111 MBytes 935 Mbits/sec
> [ 5] 6.00-7.00 sec 111 MBytes 934 Mbits/sec
> [ 5] 7.00-8.00 sec 111 MBytes 935 Mbits/sec
> [ 5] 8.00-9.00 sec 111 MBytes 934 Mbits/sec
> [ 5] 9.00-10.00 sec 111 MBytes 934 Mbits/sec
> [ 5] 10.00-10.00 sec 167 KBytes 933 Mbits/sec
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval Transfer Bitrate
> [ 5] 0.00-10.00 sec 1.09 GBytes 934 Mbits/sec receiver
>
> Reviewed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> Signed-off-by: Samin Guo <samin.guo@xxxxxxxxxxxxxxxx>
This is
Fixes: 1ff166c97972 ("riscv: dts: starfive: jh7110: Add ethernet device nodes")
right?
Attachment:
signature.asc
Description: PGP signature
