Hi, The patch set is used to implement reset controller in http://lists.infradead.org/pipermail/linux-arm-kernel/2014-November/299141.html Tested-by: Flora Fu <flora.fu@xxxxxxxxxxxx> Thanks, Flora On Mon, 2014-12-15 at 09:58 +0000, Lee Jones wrote: > On Mon, 15 Dec 2014, Philipp Zabel wrote: > > Am Montag, den 01.12.2014, 17:25 +0100 schrieb Philipp Zabel: > > > For devices which have a complete register for themselves, it is possible to > > > place them next to the syscon device with overlapping reg ranges. The same is > > > not possible for devices which only occupy bitfields in registers shared with > > > other users. > > > For devices that are completely controlled by bitfields in the syscon address > > > range, such as multiplexers or voltage regulators, allow to put child devices > > > into the syscon device node. > > > > What is the status of this patch? > > Is this ok to be applied after the merge window closes? > > > > For reference, these are the previous threads: > > https://lkml.org/lkml/2014/5/27/422 > > https://lkml.org/lkml/2014/11/3/134 > > As this is such an important driver I need more Acks for users/testers > and senior reviewers before applying. > > > > Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> > > > --- > > > Changes since v1: > > > - Reworded binding documentation to allow #size-cells = <1>, which is useful > > > for syscon children that are controlled through a (possibly shared) register > > > range. > > > --- > > > Documentation/devicetree/bindings/mfd/syscon.txt | 13 +++++++++++++ > > > drivers/mfd/syscon.c | 3 +++ > > > 2 files changed, 16 insertions(+) > > > > > > diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt > > > index fe8150b..0c6b497 100644 > > > --- a/Documentation/devicetree/bindings/mfd/syscon.txt > > > +++ b/Documentation/devicetree/bindings/mfd/syscon.txt > > > @@ -9,12 +9,25 @@ using a specific compatible value), interrogate the node (or associated > > > OS driver) to determine the location of the registers, and access the > > > registers directly. > > > > > > +Optionally, devices that are controlled exclusively through syscon registers, > > > +or even bitfields in shared syscon registers, can also be added as child nodes > > > +to the syscon device node. These devices can implicitly assume their parent > > > +node is a syscon provider without referencing it explicitly via phandle. > > > +In this case, the syscon node should have #address-cells = <1> and > > > +#size-cells = <0> or <1> and no ranges property. > > > + > > > Required properties: > > > - compatible: Should contain "syscon". > > > - reg: the register region can be accessed from syscon > > > > > > +Optional properties: > > > +- #address-cells: Should be 1. > > > +- #size-cells: Should be 0 or 1. > > > + > > > Examples: > > > gpr: iomuxc-gpr@020e0000 { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; > > > reg = <0x020e0000 0x38>; > > > }; > > > diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c > > > index ca15878..38da178 100644 > > > --- a/drivers/mfd/syscon.c > > > +++ b/drivers/mfd/syscon.c > > > @@ -155,6 +155,9 @@ static int syscon_probe(struct platform_device *pdev) > > > > > > dev_dbg(dev, "regmap %pR registered\n", res); > > > > > > + if (!of_device_is_compatible(pdev->dev.of_node, "simple-bus")) > > > + of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev); > > > + > > > return 0; > > > } > > > > > > > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
