Re: [PATCH 2/3] dt-bindings: clock: add qca8386/qca8084 clock and reset definitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/08/2023 07:19, Jie Luo wrote:
>>> +properties:
>>> +  compatible:
>>> +    const: qcom,nsscc-qca8k
>>
>> SoC name is before IP block names. See:
>> Documentation/devicetree/bindings/arm/qcom-soc.yaml
>>
>> qca8k is not SoC specific. I don't know what you are documenting here,
>> but if this is a SoC, then follow SoC rules.
>>
>> If this is not SoC, it confuses me a bit to use GCC binding.
>>
>> Anyway, this was not tested, as pointed out by bot... Please test the
>> code before sending.
>>
>> Best regards,
>> Krzysztof
>>
> 
> Hi Krzysztof,
> 
> Thanks for the review comments.
> qca8383/qca8084 is a network chip that support switch mode and PHY mode,
> the hardware register is accessed by MDIO bus, which is not a SOC.
> 
> But it has the self-contained clock controller system, the clock 
> framework of qca8386/qca8084 is same as the GCC of ipq platform such as 
> ipq9574.

OK

> 
> would you help advise whether we can document it with the compatible
> "qcom,qca8k-nsscc"?

For example:
qcom,qca8084-nsscc

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux