Hi, Changes in v2: - Added compatible for pm7550ba for eusb2 repeater and used it in DT. - Addressed some minor comments from Konrad to add fixes tag, labels and update the labels This series add support of pmics that are found in SDX75 platform and add the corresponding regulators in the IDP platform as well. It also parallely updates the pmic found in SDX65 to PM7250b and add pinctrl support for the same pmic chip. This series is based on the new header inclusion[1] and movement of the regulators level from rpmpd to rpmhpd[2]. This series can be picked after successfully picking [2] and [3] as [1] has already been applied. [1] https://lore.kernel.org/all/1689744162-9421-1-git-send-email-quic_rohiagar@xxxxxxxxxxx/ [2] https://lore.kernel.org/all/1690781104-2290-1-git-send-email-quic_rohiagar@xxxxxxxxxxx/ [3] https://lore.kernel.org/all/1690461813-22564-1-git-send-email-quic_rohiagar@xxxxxxxxxxx/ Thanks, Rohit. Rohit Agarwal (9): dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for PM7550BA arm64: dts: qcom: sdx75: Add spmi node arm64: dts: qcom: Add pinctrl gpio support for pm7250b arm64: dts: qcom: Add pm7550ba PMIC dtsi arm64: dts: qcom: Add pmx75 PMIC dtsi ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65 arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75 arm64: dts: qcom: sdx75: Add rpmhpd node arm64: dts: qcom: sdx75-idp: Add regulator nodes .../bindings/phy/qcom,snps-eusb2-repeater.yaml | 7 +- arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts | 2 +- arch/arm64/boot/dts/qcom/pm7250b.dtsi | 10 + arch/arm64/boot/dts/qcom/pm7550ba.dtsi | 70 +++++++ arch/arm64/boot/dts/qcom/pmx75.dtsi | 64 ++++++ arch/arm64/boot/dts/qcom/sdx75-idp.dts | 230 +++++++++++++++++++++ arch/arm64/boot/dts/qcom/sdx75.dtsi | 74 +++++++ 7 files changed, 455 insertions(+), 2 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/pm7550ba.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pmx75.dtsi -- 2.7.4
