On Fri, 4 Aug 2023 11:00:31 +0200
Martin Botka <martin@xxxxxxxxxx> wrote:
Hi,
thanks for the changes. Some minor things left ...
> From: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
>
> CB1 is Compute Module style board that plugs into Rpi board style adapter or
> Manta 3D printer boards (M4P/M8P).
>
> The SoM features:
> - H616 SoC
> - 1GiB of RAM
> - AXP313A PMIC
> - RTL8189FTV WiFi
>
> Boards feature:
> - 4x USB via USB2 hub (usb1 on SoM).
> - SDcard slot for loading images.
> - Ethernet port wired to the internal PHY. (100M)
> - 2x HDMI 2.0. (Only 1 usable on CB1)
> - Power and Status LEDs. (Only Status LED usable on CB1)
> - 40 pin GPIO header
>
> Currently working:
> - Booting
> - USB (USB-OTG doesnt work)
> - UART
> - MMC
> - Status LED
> - WiFi (RTL8189FS via out of tree driver)
>
> I didnt want to duplicate things so the manta DTS can also be used on BTT pi4b adapter.
> CB1 SoM has its own DTSI file in case other boards shows up that accept this SoM.
>
> Signed-off-by: Martin Botka <martin.botka@xxxxxxxxxxxxxx>
> ---
> Changes in V2:
> - Fixed whitespace errors
> - Move UART into carrier boards and BTT Pi
> - Remove usb1-vbus regulator
> - Fix ranges and naming of AXP313A rails
> - Add comment specifying why broken-cd in mmc0 is needed
> - Rename sdio_wifi to wifi
> - Specify in commit description that USB-OTG doesnt work
>
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../sun50i-h616-bigtreetech-cb1-manta.dts | 35 +++++
> .../sun50i-h616-bigtreetech-cb1.dtsi | 142 ++++++++++++++++++
> 3 files changed, 178 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
>
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index 6a96494a2e0a..7b386428510b 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
> new file mode 100644
> index 000000000000..9a30d7d627d9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2023 Martin Botka <martin.botka@xxxxxxxxxxxxxx>.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616-bigtreetech-cb1.dtsi"
> +
> +/ {
> + compatible = "bigtreetech,cb1-manta", "allwinner,sun50i-h616";
This must follow what you just added to sunxi.yaml, so:
"bigtreetech,cb1-manta", "bigtreetech,cb1", "allwinner,sun50i-h616";
And you need the human readable "model" string *here*.
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +};
> +
> +&ehci1 {
> + status = "okay";
> +};
> +
> +&ohci1 {
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_ph_pins>;
> + status = "okay";
> +};
> +
Extra empty line here.
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
> new file mode 100644
> index 000000000000..669c05f642dd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi
> @@ -0,0 +1,142 @@
> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
> +/*
> + * Copyright (C) 2023 Martin Botka <martin.botka@xxxxxxxxxxxxxx>.
> + */
> +
> +/dts-v1/;
> +
> +#include "sun50i-h616.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + model = "BigTreeTech CB1"
Apart from the missing semicolon, which actually breaks the build (as you
have discovered yourself): there shouldn't be a model string in a .dtsi
file, that should be confined to the final board .dts, just as a human
readable form of the board compatible string. So drop this here, and add
the respective name to the two .dts files.
Rest looks fine now, thanks.
Cheers,
Andre
> + aliases {
> + ethernet0 = &rtl8189ftv;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led-0 {
> + function = LED_FUNCTION_STATUS;
> + color = <LED_COLOR_ID_GREEN>;
> + gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
> + };
> + };
> +
> + reg_vcc5v: regulator-vcc5v {
> + /* board wide 5V supply from carrier boards */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc-5v";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + };
> +
> + reg_vcc33_wifi: vcc33-wifi {
> + /* Always on 3.3V regulator for WiFi */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc33-wifi";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + vin-supply = <®_vcc5v>;
> + };
> +
> + reg_vcc_wifi_io: vcc-wifi-io {
> + /* Always on 1.8V/300mA regulator for WiFi */
> + compatible = "regulator-fixed";
> + regulator-name = "vcc-wifi-io";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + vin-supply = <®_vcc33_wifi>;
> + };
> +
> + wifi_pwrseq: wifi-pwrseq {
> + compatible = "mmc-pwrseq-simple";
> + clocks = <&rtc 1>;
> + clock-names = "ext_clock";
> + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
> + post-power-on-delay-ms = <200>;
> + };
> +};
> +
> +&mmc0 {
> + vmmc-supply = <®_dldo1>;
> + /* Card detection pin is not connected */
> + broken-cd;
> + bus-width = <4>;
> + status = "okay";
> +};
> +
> +&mmc1 {
> + vmmc-supply = <®_vcc33_wifi>;
> + vqmmc-supply = <®_vcc_wifi_io>;
> + mmc-pwrseq = <&wifi_pwrseq>;
> + bus-width = <4>;
> + non-removable;
> + mmc-ddr-1_8v;
> + status = "okay";
> +
> + rtl8189ftv: wifi@1 {
> + reg = <1>;
> + };
> +};
> +
> +&r_i2c {
> + status = "okay";
> +
> + axp313a: pmic@36 {
> + compatible = "x-powers,axp313a";
> + reg = <0x36>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + regulators{
> + reg_dcdc1: dcdc1 {
> + regulator-name = "vdd-gpu-sys";
> + regulator-min-microvolt = <810000>;
> + regulator-max-microvolt = <990000>;
> + regulator-always-on;
> + };
> +
> + reg_dcdc2: dcdc2 {
> + regulator-name = "vdd-cpu";
> + regulator-min-microvolt = <810000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-ramp-delay = <200>;
> + regulator-always-on;
> + };
> +
> + reg_dcdc3: dcdc3 {
> + regulator-name = "vcc-dram";
> + regulator-min-microvolt = <1350000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-always-on;
> + };
> +
> + reg_aldo1: aldo1 {
> + regulator-name = "vcc-1v8-pll";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + reg_dldo1: dldo1 {
> + regulator-name = "vcc-3v3-io";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + };
> + };
> +};
> +
> +&usbphy {
> + status = "okay";
> +};
