Re: [PATCH v9 04/10] serial: sc16is7xx: refactor GPIO controller registration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 03, 2023 at 12:14:49PM -0400, Hugo Villeneuve wrote:
> On Mon, 31 Jul 2023 17:55:42 +0200
> Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> 
> > On Tue, Jul 25, 2023 at 10:23:36AM -0400, Hugo Villeneuve wrote:
> > > From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> > > 
> > > In preparation for upcoming patch "fix regression with GPIO
> > > configuration". To facilitate review and make code more modular.
> > 
> > I would much rather the issue be fixed _before_ the code is refactored,
> > unless it is impossible to fix it without the refactor?
> 
> Hi Greg,
> normally I would agree, but the refactor in this case helps a lot to
> address some issues raised by you and Andy in V7 of this series.
> 
> Maybe I could merge it with the actual patch "fix regression with GPIO
> configuration"?

Sure.

> > > Cc: <stable@xxxxxxxxxxxxxxx> # 6.1.x
> > 
> > What commit id does this fix?
> 
> It doesn't fix anything, but I tought that I needed this tag since
> this patch is a prerequisite for the next patch in the series, which
> would be applied to stable kernels. I will remove this tag (assuming
> the patch stays as it is, depending on your answer to the above
> question).
> 
>  
> > > Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
> > > Reviewed-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx>
> > > Tested-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx>
> > > ---
> > >  drivers/tty/serial/sc16is7xx.c | 40 ++++++++++++++++++++--------------
> > >  1 file changed, 24 insertions(+), 16 deletions(-)
> > > 
> > > diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> > > index 32d43d00a583..5b0aeef9d534 100644
> > > --- a/drivers/tty/serial/sc16is7xx.c
> > > +++ b/drivers/tty/serial/sc16is7xx.c
> > > @@ -332,6 +332,7 @@ struct sc16is7xx_one {
> > >  
> > >  struct sc16is7xx_port {
> > >  	const struct sc16is7xx_devtype	*devtype;
> > > +	struct device			*dev;
> > 
> > Why is this pointer needed?
> > 
> > Why is it grabbed and yet the reference count is never incremented?  Who
> > owns the reference count and when will it go away?
> > 
> > And what device is this?  The parent?  Current device?  What type of
> > device is it?  And why is it needed?
> > 
> > Using "raw" devices is almost never something a driver should do, they
> > are only passed into functions by the driver core, but then the driver
> > should instantly turn them into the "real" structure.
> 
> We already discussed that a lot in previous versions (v7)... I am
> trying my best to modify the code to address your concerns, but I am
> not fully understanding what you mean about raw devices, and you didn't
> answer some of my previous questions/interrogations in v7 about that.

I don't have time to answer all questions, sorry.

Please help review submitted patches to reduce my load and allow me to
answer other stuff :)

> So, in the new function that I
> need to implement, sc16is7xx_setup_gpio_chip(), I absolutely need to use
> a raw device to read a device tree property and to set
> s->gpio.parent:
> 
>     count = device_property_count_u32(dev, ...
>     ...
>     s->gpio.parent = dev;
> 
> Do we agree on that?

Yes, but what type of parent is that?

> Then, how do I pass this raw device to the 
> device_property_count_u32() function and to the s->gpio.parent
> assignment?
> 
> Should I modify sc16is7xx_setup_gpio_chip() like so:
> 
>     static int sc16is7xx_setup_gpio_chip(struct sc16is7xx_port *s)
>     {
> 	struct device *dev = &s->p[0].port.dev;
> 
>         count = device_property_count_u32(dev, ...
>         ...
>         s->gpio.parent = dev;

Again, what is the real type of that parent?  It's a port, right, so
pass in the port to this function and then do the "take the struct
device of the port" at that point in time.

thanks,

greg k-h



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux