Re: [PATCH v2 3/4] dt-bindings: PCI: Add StarFive JH7110 PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 27, 2023 at 06:39:48PM +0800, Minda Chen wrote:
> Add StarFive JH7110 SoC PCIe controller dt-bindings.
> JH7110 using PLDA XpressRICH PCIe host controller IP.
> 
> Signed-off-by: Minda Chen <minda.chen@xxxxxxxxxxxxxxxx>
> Reviewed-by: Hal Feng <hal.feng@xxxxxxxxxxxxxxxx>
> ---
>  .../bindings/pci/starfive,jh7110-pcie.yaml    | 133 ++++++++++++++++++
>  1 file changed, 133 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> new file mode 100644
> index 000000000000..9273e029fb20
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 PCIe host controller
> +
> +maintainers:
> +  - Kevin Xie <kevin.xie@xxxxxxxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +  - $ref: plda,xpressrich3-axi-common.yaml#
> +  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
> +  - $ref: /schemas/gpio/gpio-consumer-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-pcie
> +
> +  clocks:
> +    items:
> +      - description: NOC bus clock
> +      - description: Transport layer clock
> +      - description: AXI MST0 clock
> +      - description: APB clock
> +
> +  clock-names:
> +    items:
> +      - const: noc
> +      - const: tl
> +      - const: axi_mst0
> +      - const: apb
> +
> +  resets:
> +    items:
> +      - description: AXI MST0 reset
> +      - description: AXI SLAVE0 reset
> +      - description: AXI SLAVE reset
> +      - description: PCIE BRIDGE reset
> +      - description: PCIE CORE reset
> +      - description: PCIE APB reset
> +
> +  reset-names:
> +    items:
> +      - const: mst0
> +      - const: slv0
> +      - const: slv
> +      - const: brg
> +      - const: core
> +      - const: apb
> +
> +  starfive,stg-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      - items:
> +          - description: phandle to System Register Controller stg_syscon node.
> +          - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +          - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +          - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +          - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +    description:
> +      The phandle to System Register Controller syscon node and the offset
> +      of STG_SYSCONSAIF__SYSCFG register for PCIe. Total 4 regsisters offset
> +      for PCIe.

These property names tie them closely with naming on the jh7110, but
there's little value in specifying all of these offsets when you have
one implementation where they are all fixed.
Do you know what the jh81xx stuff is going to do yet w.r.t. PCI and if
so, how could you reuse this property?
Particularly, saying "register 0" seems unlikely to transfer well
between SoCs.
I'd be inclined to drop the offsets entirely & rely on match data to
provide them if needed in the future.

> +
> +  phys:
> +    description:
> +      Specified PHY is attached to PCIe controller.
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - clocks
> +  - resets
> +  - starfive,stg-syscon
> +  - "#interrupt-cells"
> +  - interrupt-map-mask
> +  - interrupt-map
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie0: pcie@2b000000 {

nit: you don't need labels in examples if they are not referenced
anywhere.

Otherwise, this looks good to me.

Thanks,
Conor.

> +            compatible = "starfive,jh7110-pcie";
> +            reg = <0x9 0x40000000 0x0 0x10000000>,
> +                  <0x0 0x2b000000 0x0 0x1000000>;
> +            reg-names = "cfg", "apb";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            #interrupt-cells = <1>;
> +            device_type = "pci";
> +            ranges = <0x82000000  0x0 0x30000000  0x0 0x30000000 0x0 0x08000000>,
> +                     <0xc3000000  0x9 0x00000000  0x9 0x00000000 0x0 0x40000000>;
> +            starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130 0x1b8>;
> +            bus-range = <0x0 0xff>;
> +            interrupt-parent = <&plic>;
> +            interrupts = <56>;
> +            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +            interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
> +                            <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
> +                            <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
> +                            <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
> +            msi-parent = <&pcie0>;
> +            msi-controller;
> +            clocks = <&syscrg 86>,
> +                     <&stgcrg 10>,
> +                     <&stgcrg 8>,
> +                     <&stgcrg 9>;
> +            clock-names = "noc", "tl", "axi_mst0", "apb";
> +            resets = <&stgcrg 11>,
> +                     <&stgcrg 12>,
> +                     <&stgcrg 13>,
> +                     <&stgcrg 14>,
> +                     <&stgcrg 15>,
> +                     <&stgcrg 16>;
> +            reset-gpios = <&gpios 26 GPIO_ACTIVE_LOW>;
> +            phys = <&pciephy0>;
> +
> +            pcie_intc0: interrupt-controller {
> +                #address-cells = <0>;
> +                #interrupt-cells = <1>;
> +                interrupt-controller;
> +            };
> +        };
> +    };
> -- 
> 2.17.1
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux