On 2023-08-03 22:47:23, Danila Tikhonov wrote: > Document the DPU hardware found on the Qualcomm SM7150 platform. > > Signed-off-by: Danila Tikhonov <danila@xxxxxxxxxxx> > --- > .../bindings/display/msm/qcom,sm7150-dpu.yaml | 116 ++++++++++++++++++ > 1 file changed, 116 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml > > diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml > new file mode 100644 > index 000000000000..0d86997ae09f > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml > @@ -0,0 +1,116 @@ > +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-dpu.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SM7150 Display DPU > + > +maintainers: > + - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > + - Danila Tikhonov <danila@xxxxxxxxxxx> > + > +$ref: /schemas/display/msm/dpu-common.yaml# > + > +properties: > + compatible: > + const: qcom,sm7150-dpu > + > + reg: > + items: > + - description: Address offset and size for mdp register set > + - description: Address offset and size for vbif register set > + > + reg-names: > + items: > + - const: mdp > + - const: vbif > + > + clocks: > + items: > + - description: Display hf axi clock > + - description: Display ahb clock > + - description: Display rotator clock > + - description: Display lut clock > + - description: Display core clock > + - description: Display vsync clock > + > + clock-names: > + items: > + - const: bus > + - const: iface > + - const: rot > + - const: lut > + - const: core > + - const: vsync > + > +required: > + - compatible > + - reg > + - reg-names > + - clocks > + - clock-names > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/qcom,sm7150-dispcc.h> > + #include <dt-bindings/clock/qcom,sm7150-gcc.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/power/qcom-rpmpd.h> > + > + display-controller@ae01000 { > + compatible = "qcom,sm7150-dpu"; > + reg = <0x0ae01000 0x8f000>, > + <0x0aeb0000 0x2008>; > + reg-names = "mdp", "vbif"; > + > + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>, > + <&dispcc DISP_CC_MDSS_ROT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>, > + <&dispcc DISP_CC_MDSS_MDP_CLK>, > + <&dispcc DISP_CC_MDSS_VSYNC_CLK>; > + clock-names = "bus", "iface", "rot", "lut", "core", > + "vsync"; > + > + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>, > + <&dispcc DISP_CC_MDSS_ROT_CLK>, > + <&dispcc DISP_CC_MDSS_AHB_CLK>; > + assigned-clock-rates = <19200000>, > + <19200000>, > + <19200000>; > + > + operating-points-v2 = <&mdp_opp_table>; > + power-domains = <&rpmhpd SM7150_CX>; > + > + interrupt-parent = <&mdss>; > + interrupts = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + endpoint { > + remote-endpoint = <&dsi0_in>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + endpoint { > + remote-endpoint = <&dsi1_in>; > + }; I don't think this compiles with a missing closing bracket. Did you test the bindings? - Marijn > + > + port@2 { > + reg = <2>; > + endpoint { > + remote-endpoint = <&dp_in>; > + }; > + }; > + }; > + }; > +... > -- > 2.41.0 >
