Hi Konrad, On 11.07.23 15:17, Konrad Dybcio wrote:
Many parts of Qualcomm SoCs are entirely independent of each other and can run when the other parts are off. The RPMh system architecture embraces this by giving each (loosely defined) subsystem its own connection (as in, physical wires) to the AOSS, terminated by per-subsystem RSCs (Resource State Coordinators) that barter for power, bandwidth etc. This series introduces the groundwork necessary for voting for resources through non-APPS RSCs. It should allow for lower-latency vote adjustments (e.g. for very high bandwidth / multiple displays) and could potentially allow for full APSS collapse while keeping e.g. MDSS operating (say refreshing an image from a RAM buffer).
This is good stuff. Thanks for working on it! Actually the path tagging, that have been introduced some time ago could be used for supporting the multiple RSCs. Today we can get the tags from DT, and tag the path with some DISP_RSC flag (for example) and avoid the qcom,bcm-voter-idx property. Mike has been also looking into this, so maybe he can share his thoughts.
On top of that, a rather necessary and overdue cleanup is performed to stop adding more and more arguments to the insane preprocessor macros.
Retiring the DEFINE_QNODE is good clean-up, but some patches failed to apply so a re-base would be needed. Thanks, Georgi
Partially reverting (or reimplementing the revert) [1] will be necessary to coordinate the rather complex relationship between the DPU and RSC drivers. The "Point x paths to the x RSC" patches won't do anything (check the compatibility workaround qcom_icc_pre_aggregate()) until disp_rsc is properly described in the device tree, along with its BCM voter), but they prepare ground for when that happens. I was able to test sending requests through the DISP_RSC on SM8450, but I had to hack its clocks (_rscc_ in dispcc) to be always-on, as we don't have any clk handling for qcom,rpmh-rsc today. Boot-tested on SM8350 and SM8450, nothing exploded. [1] https://patchwork.kernel.org/project/dri-devel/patch/1521827074-28424-1-git-send-email-ryadav@xxxxxxxxxxxxxx/ Dependencies: [2] https://lore.kernel.org/linux-arm-msm/113b50f8-35f6-73fc-4fc9-302262927c5e@xxxxxxxxxxx/ [3] https://lore.kernel.org/linux-arm-msm/20230703-topic-8250_qup_icc-v2-0-9ba0a9460be2@xxxxxxxxxx/ Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx> --- Konrad Dybcio (53): dt-bindings: interconnect: qcom,icc: Introduce fixed BCM voter indices dt-bindings: interconnect: qcom,bcm-voter: Add qcom,bcm-voter-idx interconnect: qcom: icc-rpmh: Store direct BCM voter references interconnect: qcom: icc-rpmh: Retire dead code interconnect: qcom: icc-rpmh: Implement voting on non-APPS RSCs interconnect: qcom: sc7180: Retire DEFINE_QNODE interconnect: qcom: sdm670: Retire DEFINE_QNODE interconnect: qcom: sdm845: Retire DEFINE_QNODE interconnect: qcom: sdx55: Retire DEFINE_QNODE interconnect: qcom: sdx65: Retire DEFINE_QNODE interconnect: qcom: sm6350: Retire DEFINE_QNODE interconnect: qcom: sm8150: Retire DEFINE_QNODE interconnect: qcom: sm8250: Retire DEFINE_QNODE interconnect: qcom: sm8350: Retire DEFINE_QNODE interconnect: qcom: icc-rpmh: Retire DEFINE_QNODE interconnect: qcom: sc7180: Retire DEFINE_QBCM interconnect: qcom: sdm670: Retire DEFINE_QBCM interconnect: qcom: sdm845: Retire DEFINE_QBCM interconnect: qcom: sdx55: Retire DEFINE_QBCM interconnect: qcom: sdx65: Retire DEFINE_QBCM interconnect: qcom: sm6350: Retire DEFINE_QBCM interconnect: qcom: sm8150: Retire DEFINE_QBCM interconnect: qcom: sm8250: Retire DEFINE_QBCM interconnect: qcom: sm8350: Retire DEFINE_QBCM interconnect: qcom: icc-rpmh: Retire DEFINE_QBCM interconnect: qcom: qdu1000: Explicitly assign voter_idx interconnect: qcom: sa8775p: Explicitly assign voter_idx interconnect: qcom: sc7280: Explicitly assign voter_idx interconnect: qcom: sc8180x: Explicitly assign voter_idx interconnect: qcom: sc8280xp: Explicitly assign voter_idx interconnect: qcom: sm8450: Explicitly assign voter_idx interconnect: qcom: sm8550: Explicitly assign voter_idx arm64: dts: qcom: qdu1000: add qcom,bcm-voter-idx arm64: dts: qcom: sa8775p: add qcom,bcm-voter-idx arm64: dts: qcom: sc7180: add qcom,bcm-voter-idx arm64: dts: qcom: sc7280: add qcom,bcm-voter-idx arm64: dts: qcom: sc8180x: add qcom,bcm-voter-idx arm64: dts: qcom: sc8280xp: add qcom,bcm-voter-idx arm64: dts: qcom: sdm670: add qcom,bcm-voter-idx arm64: dts: qcom: sdm845: add qcom,bcm-voter-idx arm64: dts: qcom: sdx75: add qcom,bcm-voter-idx arm64: dts: qcom: sm6350: add qcom,bcm-voter-idx arm64: dts: qcom: sm8150: add qcom,bcm-voter-idx arm64: dts: qcom: sm8250: add qcom,bcm-voter-idx arm64: dts: qcom: sm8350: add qcom,bcm-voter-idx arm64: dts: qcom: sm8450: add qcom,bcm-voter-idx arm64: dts: qcom: sm8550: add qcom,bcm-voter-idx arm64: dts: qcom: sdx55: add qcom,bcm-voter-idx arm64: dts: qcom: sdx65: add qcom,bcm-voter-idx interconnect: qcom: sm8350: Point display paths to the display RSC interconnect: qcom: sm8450: Point display paths to the display RSC interconnect: qcom: sm8550: Point display paths to the display RSC interconnect: qcom: sm8550: Point camera paths to the camera RSC .../bindings/interconnect/qcom,bcm-voter.yaml | 10 + arch/arm/boot/dts/qcom/qcom-sdx55.dtsi | 1 + arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 1 + arch/arm64/boot/dts/qcom/qdu1000.dtsi | 2 + arch/arm64/boot/dts/qcom/sa8775p.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7180.dtsi | 1 + arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 + arch/arm64/boot/dts/qcom/sc8180x.dtsi | 2 + arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 2 + arch/arm64/boot/dts/qcom/sdm670.dtsi | 2 + arch/arm64/boot/dts/qcom/sdm845.dtsi | 2 + arch/arm64/boot/dts/qcom/sdx75.dtsi | 2 + arch/arm64/boot/dts/qcom/sm6350.dtsi | 1 + arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 + arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 + arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 + arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 + arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 + drivers/interconnect/qcom/bcm-voter.c | 75 +- drivers/interconnect/qcom/bcm-voter.h | 9 - drivers/interconnect/qcom/icc-rpmh.c | 53 +- drivers/interconnect/qcom/icc-rpmh.h | 14 +- drivers/interconnect/qcom/qdu1000.c | 11 + drivers/interconnect/qcom/sa8775p.c | 28 + drivers/interconnect/qcom/sc7180.c | 1637 +++++++++++++++-- drivers/interconnect/qcom/sc7280.c | 27 + drivers/interconnect/qcom/sc8180x.c | 23 + drivers/interconnect/qcom/sc8280xp.c | 27 + drivers/interconnect/qcom/sdm670.c | 1410 +++++++++++++-- drivers/interconnect/qcom/sdm845.c | 1683 ++++++++++++++++-- drivers/interconnect/qcom/sdx55.c | 863 ++++++++- drivers/interconnect/qcom/sdx65.c | 850 ++++++++- drivers/interconnect/qcom/sm6350.c | 1551 +++++++++++++++-- drivers/interconnect/qcom/sm8150.c | 1714 ++++++++++++++++-- drivers/interconnect/qcom/sm8250.c | 1772 +++++++++++++++++-- drivers/interconnect/qcom/sm8350.c | 1830 ++++++++++++++++++-- drivers/interconnect/qcom/sm8450.c | 24 + drivers/interconnect/qcom/sm8550.c | 42 + include/dt-bindings/interconnect/qcom,icc.h | 8 + 39 files changed, 12320 insertions(+), 1370 deletions(-) --- base-commit: 82cee168d497ffcb79e4889fe3c7384788e89f4d change-id: 20230708-topic-rpmh_icc_rsc-f897080fb207 Best regards,
