Hi everyone, This series splits out the MT6366 PMIC from the MT6358. The two PMICs are mostly identical, except for the regulator bits. The MT6366 is missing the VCAM* (camera related) LDOs, but in their place has a few other ones. This thus requires a separate DT binding and compatible. This depends on my previous "regulator: mt6358: Remove bogus regulators and improvements" series [1]. The series is still in flight, but I think posting this earlier would help get reviews underway. Patch 1 splits out the compatible string for the MT6366 PMIC, so that it no longer falls back to the MT6358 one. Patch 2 adds new register definitions for the MT6366-specific regulators. Patch 3 adds a new entry for the MT6366 PMIC to the MT6397 mfd driver. These three should go through the MFD tree and put on an immutable branch for the regulator tree to consume patch 2. Patch 4 adds new binding for MT6366 regulators. This was previously done by Zhiyong Tao [2] from MediaTek. I cleaned up the patch based on previous review comments, simplified the regulator names, and added regulator supplies. Bogus regulators were also dropped, like what was done for the MT6358 [1]. Patch 5 simplifies the MT6366 regulator names to match the new names specified in the binding. Patch 6 makes the MT6366 VCN18 LDO regulator configurable. This is one of the differences between the MT6358 and MT6366. Patch 7 adds regulators that were missing from the originally proposed binding and driver. Patch 8 adds regulator supply names to the MT6366 regulators Patch 9 adds an entry for the MT6366 PMIC to the MedaiTek pwrap driver. As mentioned, patches 1 through 3 should go through the mfd tree on an immutable branch. patches 4 through 8 should go through the regulator tree, on top of the aforementioned immutable branch. Patch 9 should go through the MediaTek tree. [1] https://lore.kernel.org/linux-arm-kernel/20230721082903.2038975-1-wenst@xxxxxxxxxxxx/ [2] https://lore.kernel.org/linux-arm-kernel/20220823123745.14061-1-zhiyong.tao@xxxxxxxxxxxx/ Chen-Yu Tsai (8): dt-bindings: mfd: mt6397: Split out compatible for MediaTek MT6366 PMIC mfd: mt6358: Add registers for MT6366 specific regulators mfd: mt6397: Split MediaTek MT6366 PMIC out of MT6358 regulator: mt6358: fix and drop type prefix in MT6366 regulator node names regulator: mt6358: Make MT6366 vcn18 LDO configurable regulator: mt6358: Add missing regulators for MT6366 regulator: mt6358: Add supply names for MT6366 regulators soc: mediatek: pwrap: add support for MT6366 PMIC Zhiyong Tao (1): regulator: dt-bindings: mediatek: Add MT6366 PMIC .../devicetree/bindings/mfd/mt6397.txt | 5 +- .../regulator/mediatek,mt6366-regulator.yaml | 154 ++++++++++++++++++ drivers/mfd/mt6397-core.c | 31 ++++ drivers/regulator/mt6358-regulator.c | 127 ++++++++++----- drivers/soc/mediatek/mtk-pmic-wrap.c | 2 + include/linux/mfd/mt6358/registers.h | 18 ++ include/linux/regulator/mt6358-regulator.h | 3 + 7 files changed, 296 insertions(+), 44 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6366-regulator.yaml -- 2.41.0.585.gd2178a4bd4-goog
