Add bindings for Richtek RTQ2208 IC controlled SubPMIC Signed-off-by: Alina Yu <alina_yu@xxxxxxxxxxx> --- v6 - Add "additionalProperties: false" to regulator node v5 - Revise filename from $id - Remove "regulator-compatible" for ldos - Add missing "high" for "richtek,mtp-sel-high" - Remove "regulator-mode" property - Add and modify "unevaluatedProperties: false" and "additionalProperties: false" - Remove "richtek,fixed-uV" - Remove redundant space in "buck-a" and "ldo2" v4 - Modify filename to "richtek,rtq2208" - Add more desciptions for "regulator-allowed-modes" --- .../bindings/regulator/richtek,rtq2208.yaml | 197 +++++++++++++++++++++ 1 file changed, 197 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml new file mode 100644 index 0000000..609c066 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/richtek,rtq2208.yaml @@ -0,0 +1,197 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/richtek,rtq2208.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RTQ2208 SubPMIC Regulator + +maintainers: + - Alina Yu <alina_yu@xxxxxxxxxxx> + +description: | + RTQ2208 is a highly integrated power converter that offers functional safety dual + multi-configurable synchronous buck converters and two LDOs. + + Bucks support "regulator-allowed-modes" and "regulator-mode". The former defines the permitted + switching operation in normal mode; the latter defines the operation in suspend to RAM mode. + + No matter the RTQ2208 is configured to normal or suspend to RAM mode, there are two switching + operation modes for all buck rails, automatic power saving mode (Auto mode) and forced continuous + conduction mode (FCCM). + + The definition of modes is in the datasheet which is available in below link + and their meaning is:: + 0 - Auto mode for power saving, which reducing the switching frequency at light load condition + to maintain high frequency. + 1 - FCCM to meet the strict voltage regulation accuracy, which keeping constant switching frequency. + + Datasheet will be available soon at + https://www.richtek.com/assets/Products + +properties: + compatible: + enum: + - richtek,rtq2208 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + richtek,mtp-sel-high: + type: boolean + description: + vout register selection based on this boolean value. + false - Using DVS0 register setting to adjust vout + true - Using DVS1 register setting to adjust vout + + regulators: + type: object + additionalProperties: false + + patternProperties: + "^buck-[a-h]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + description for buck-[a-h] regulator. + + properties: + regulator-allowed-modes: + description: + two buck modes in different switching accuracy. + 0 - Auto mode + 1 - FCCM + items: + enum: [0, 1] + + "^ldo[1-2]$": + type: object + $ref: regulator.yaml# + unevaluatedProperties: false + description: + regulator description for ldo[1-2]. + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@10 { + compatible = "richtek,rtq2208"; + reg = <0x10>; + interrupts-extended = <&gpio26 0 IRQ_TYPE_LEVEL_LOW>; + richtek,mtp-sel-high; + + regulators { + buck-a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-c { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-d { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-e { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-f { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-g { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + buck-h { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <2050000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-mode = <1>; + }; + }; + ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + ldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + }; + }; + }; -- 2.7.4
