On Wed, Jul 26, 2023 at 05:02:23PM +0200, Herve Codina wrote: > A framer can be connected to the QMC HDLC. > If present, this framer is the interface between the TDM used by the QMC > HDLC and the E1/T1 line. > The QMC HDLC can use this framer to get information about the line and > configure the line. > > Add an optional framer property to reference the framer itself. > > Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx> > --- > Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml > index 8bb6f34602d9..bf29863ab419 100644 > --- a/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml > +++ b/Documentation/devicetree/bindings/net/fsl,qmc-hdlc.yaml > @@ -27,6 +27,11 @@ properties: > Should be a phandle/number pair. The phandle to QMC node and the QMC > channel to use. > > + framer: > + $ref: /schemas/types.yaml#/definitions/phandle Now you've defined this property twice. Please avoid doing that. > + description: > + phandle to the framer node > + > required: > - compatible > - fsl,qmc-chan > -- > 2.41.0 >
