[PATCH 10/13] arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level

[Andrew Davis <afd@xxxxxx>]

GPIO nodes defined in the top-level J7200 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.

Disable the GPIO nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@xxxxxx>
---
 .../boot/dts/ti/k3-j7200-common-proc-board.dts | 18 ++++--------------
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi      |  4 ++++
 .../arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi |  2 ++
 3 files changed, 10 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index dee9056f56051..4a5c4f36baeec 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -240,27 +240,17 @@ &main_uart3 {
 	pinctrl-0 = <&main_uart3_pins_default>;
 };
 
-&main_gpio2 {
-	status = "disabled";
-};
-
-&main_gpio4 {
-	status = "disabled";
-};
-
-&main_gpio6 {
-	status = "disabled";
+&main_gpio0 {
+	status = "okay";
+	/* default pins */
 };
 
 &wkup_gpio0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&wkup_gpio_pins_default>;
 };
 
-&wkup_gpio1 {
-	status = "disabled";
-};
-
 &mcu_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 5d7542ba41b93..6a776f3bbcb19 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -832,6 +832,7 @@ main_gpio0: gpio@600000 {
 		power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 105 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio2: gpio@610000 {
@@ -849,6 +850,7 @@ main_gpio2: gpio@610000 {
 		power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 107 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio4: gpio@620000 {
@@ -866,6 +868,7 @@ main_gpio4: gpio@620000 {
 		power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 109 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_gpio6: gpio@630000 {
@@ -883,6 +886,7 @@ main_gpio6: gpio@630000 {
 		power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 111 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	main_spi0: spi@2100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 571eb0e2eac92..5ae7320efad7b 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -297,6 +297,7 @@ wkup_gpio0: gpio@42110000 {
 		power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 113 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	wkup_gpio1: gpio@42100000 {
@@ -313,6 +314,7 @@ wkup_gpio1: gpio@42100000 {
 		power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 114 0>;
 		clock-names = "gpio";
+		status = "disabled";
 	};
 
 	mcu_navss: bus@28380000 {
-- 
2.39.2