[PATCH v3 0/2] add the dvs support for rk808

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




rk808 has a dvs function, there are 3 pins for dvs, dvs1 & dvs2 & dvsok.
Normally, the voltage of DCDC1/DCDC2 are controlled by BUCKn_ON_VSEL, when
we pull dvs1/dvs2 pin to active, they would be controlled by BUCKn_DVS_VSEL.
And the dvsok pin is used to indicate whether regulating has been completed.
When dvs1/dvs2 pin change, dvsok would be pull down, and it would be pull up
once the regulating is complete.

Changes in v3:
- Modify the syntax error

Changes in v2:
- increase description about dvs pins
- modify the multiline commenting

Chris Zhong (2):
  mfd: dt-bindings: add the description about dvs gpio for rk808
  regulator: rk808: add dvs support

 Documentation/devicetree/bindings/mfd/rk808.txt |  13 +-
 drivers/regulator/rk808-regulator.c             | 192 ++++++++++++++++++++++--
 2 files changed, 192 insertions(+), 13 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux