Re: [PATCH 1/2] drm/panel: sitronix-st7789v: add panel orientation support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/07/2023 17:12, Michael Riesch wrote:
Determine the orientation of the display based on the device tree and
propagate it.

While at it, fix the indentation in the struct drm_panel_funcs.

Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
---
  drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 28 +++++++++++++++++++++-----
  1 file changed, 23 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
index bbc4569cbcdc..6575f07d49e3 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
@@ -116,6 +116,7 @@ struct st7789v {
  	struct spi_device *spi;
  	struct gpio_desc *reset;
  	struct regulator *power;
+	enum drm_panel_orientation orientation;
  };
enum st7789v_prefix {
@@ -170,6 +171,7 @@ static const struct drm_display_mode default_mode = {
  static int st7789v_get_modes(struct drm_panel *panel,
  			     struct drm_connector *connector)
  {
+	struct st7789v *ctx = panel_to_st7789v(panel);
  	struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &default_mode);
@@ -188,9 +190,22 @@ static int st7789v_get_modes(struct drm_panel *panel,
  	connector->display_info.width_mm = 61;
  	connector->display_info.height_mm = 103;
+ /*
+	 * TODO: Remove once all drm drivers call
+	 * drm_connector_set_orientation_from_panel()
+	 */
+	drm_connector_set_panel_orientation(connector, ctx->orientation);
+
  	return 1;
  }
+static enum drm_panel_orientation st7789v_get_orientation(struct drm_panel *p)
+{
+	struct st7789v *ctx = panel_to_st7789v(p);
+
+	return ctx->orientation;
+}
+
  static int st7789v_prepare(struct drm_panel *panel)
  {
  	struct st7789v *ctx = panel_to_st7789v(panel);
@@ -346,11 +361,12 @@ static int st7789v_unprepare(struct drm_panel *panel)
  }
static const struct drm_panel_funcs st7789v_drm_funcs = {
-	.disable	= st7789v_disable,
-	.enable		= st7789v_enable,
-	.get_modes	= st7789v_get_modes,
-	.prepare	= st7789v_prepare,
-	.unprepare	= st7789v_unprepare,
+	.disable = st7789v_disable,
+	.enable	= st7789v_enable,
+	.get_modes = st7789v_get_modes,
+	.get_orientation = st7789v_get_orientation,
+	.prepare = st7789v_prepare,
+	.unprepare = st7789v_unprepare,

Changing the indentation of the whole block is a spurious change,
either change it in a separate patch or use the current indentation style...

  };
static int st7789v_probe(struct spi_device *spi)
@@ -382,6 +398,8 @@ static int st7789v_probe(struct spi_device *spi)
  	if (ret)
  		return ret;
+ of_drm_get_panel_orientation(spi->dev.of_node, &ctx->orientation);
+
  	drm_panel_add(&ctx->panel);
return 0;


With this changed:

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Thanks,
Neil




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux