Now that alarm support for ISL12057 chip is available, let's use a
feature of the driver dedicated to NETGEAR ReadyNAS 2120 specific
routing of RTC IRQ#1 pin; on the device, this pin is not connected
to the SoC but to a PMIC, which allows the device to be powered
up when RTC alarm rings.
For that to work, the chip needs to be explicitly marked as a
device wakeup source using the "can-wakeup-machine" boolean
property. This makes 'wakealarm' sysfs entry available to
configure the alarm.
Signed-off-by: Arnaud Ebalard <arno@xxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index d81430aa4ab3..f5c7cb52f1f9 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -100,6 +100,7 @@
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
+ can-wakeup-machine;
};
/* Controller for rear fan #1 of 3 (Protechnic
--
2.1.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
