On 8/1/23 2:00 AM, Jayesh Choudhary wrote:
From: Siddharth Vadapalli <s-vadapalli@xxxxxx>
The system controller node manages the CTRL_MMR0 region.
Add serdes_ln_ctrl node which is used for controlling the SERDES lane mux.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
[j-choudhary@xxxxxx: Fix serdes_ln_ctrl node]
Signed-off-by: Jayesh Choudhary <j-choudhary@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 40 ++++++++++++++++++++++
1 file changed, 40 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 11f163e5cadf..8a816563706b 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -5,6 +5,10 @@
* Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
*/
+#include <dt-bindings/mux/mux.h>
+
+#include "k3-serdes.h"
+
&cbass_main {
msmc_ram: sram@70000000 {
compatible = "mmio-sram";
@@ -26,6 +30,42 @@ l3cache-sram@200000 {
};
};
+ scm_conf: bus@100000 {
+ compatible = "simple-bus";
+ reg = <0x00 0x00100000 0x00 0x1c000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00 0x00 0x00100000 0x1c000>;
+
+ serdes_ln_ctrl: mux-controller@4080 {
+ compatible = "mmio-mux";
The parent is not a syscon node, this should be "reg-mux".
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/mux/reg-mux.yaml#n19
Andrew
+ reg = <0x00004080 0x30>;
+ #mux-control-cells = <1>;
+ mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
+ <0x4088 0x3>, <0x408c 0x3>, /* SERDES0 lane2/3 select */
+ <0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
+ <0x4098 0x3>, <0x409c 0x3>, /* SERDES1 lane2/3 select */
+ <0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
+ <0x40a8 0x3>, <0x40ac 0x3>; /* SERDES2 lane2/3 select */
+ idle-states = <J784S4_SERDES0_LANE0_PCIE1_LANE0>,
+ <J784S4_SERDES0_LANE1_PCIE1_LANE1>,
+ <J784S4_SERDES0_LANE2_IP3_UNUSED>,
+ <J784S4_SERDES0_LANE3_USB>,
+ <J784S4_SERDES1_LANE0_PCIE0_LANE0>,
+ <J784S4_SERDES1_LANE1_PCIE0_LANE1>,
+ <J784S4_SERDES1_LANE2_PCIE0_LANE2>,
+ <J784S4_SERDES1_LANE3_PCIE0_LANE3>,
+ <J784S4_SERDES2_LANE0_IP2_UNUSED>,
+ <J784S4_SERDES2_LANE1_IP2_UNUSED>,
+ <J784S4_SERDES2_LANE2_QSGMII_LANE1>,
+ <J784S4_SERDES2_LANE3_QSGMII_LANE2>,
+ <J784S4_SERDES4_LANE0_EDP_LANE0>,
+ <J784S4_SERDES4_LANE1_EDP_LANE1>,
+ <J784S4_SERDES4_LANE2_EDP_LANE2>,
+ <J784S4_SERDES4_LANE3_EDP_LANE3>;
+ };
+ };
+
gic500: interrupt-controller@1800000 {
compatible = "arm,gic-v3";
#address-cells = <2>;
