RE: [PATCH v18 17/20] PCI: rcar-gen4: Add R-Car Gen4 PCIe Host support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Serge,

> From: Serge Semin, Sent: Tuesday, August 1, 2023 10:07 AM
> 
> On Mon, Jul 24, 2023 at 05:58:20PM +0530, Manivannan Sadhasivam wrote:
> > On Fri, Jul 21, 2023 at 04:44:49PM +0900, Yoshihiro Shimoda wrote:
> > > Add R-Car Gen4 PCIe Host support. This controller is based on
> > > Synopsys DesignWare PCIe, but this controller has vendor-specific
> > > registers so that requires initialization code like mode setting
> > > and retraining and so on.
> > >
> > > To reduce code delta, adds some helper functions which are used by
> > > both the host driver and the endpoint driver (which is added
> > > immediately afterwards) into a separate file.
> > >
> > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > > ---
> > >  drivers/pci/controller/dwc/Kconfig            |   9 +
> > >  drivers/pci/controller/dwc/Makefile           |   2 +
> > >  .../pci/controller/dwc/pcie-rcar-gen4-host.c  | 149 +++++++++++++
> > >  drivers/pci/controller/dwc/pcie-rcar-gen4.c   | 200 ++++++++++++++++++
> > >  drivers/pci/controller/dwc/pcie-rcar-gen4.h   |  44 ++++
> > >  5 files changed, 404 insertions(+)
> > >  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4-host.c
> > >  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > >  create mode 100644 drivers/pci/controller/dwc/pcie-rcar-gen4.h
> > >
> > > diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> > > index ab96da43e0c2..64d4d37bc891 100644
> > > --- a/drivers/pci/controller/dwc/Kconfig
> > > +++ b/drivers/pci/controller/dwc/Kconfig
> > > @@ -415,4 +415,13 @@ config PCIE_VISCONTI_HOST
> > >  	  Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
> > >  	  This driver supports TMPV7708 SoC.
> > >
> > > +config PCIE_RCAR_GEN4
> > > +	tristate "Renesas R-Car Gen4 PCIe Host controller"
> > > +	depends on ARCH_RENESAS || COMPILE_TEST
> > > +	depends on PCI_MSI
> > > +	select PCIE_DW_HOST
> > > +	help
> > > +	  Say Y here if you want PCIe host controller support on R-Car Gen4 SoCs.
> >
> > Add a line about module option and specify the module name. Like,
> >
> > To compile this driver as a module, choose M here: the module will be called
> > pcie-rcar-gen4-host-drv.ko.
> >
> > I have a suggestion for module name change below...
> >
> > > +	  This uses the DesignWare core.
> > > +
> > >  endmenu
> > > diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> > > index bf5c311875a1..486cf706b53d 100644
> > > --- a/drivers/pci/controller/dwc/Makefile
> > > +++ b/drivers/pci/controller/dwc/Makefile
> > > @@ -26,6 +26,8 @@ obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
> > >  obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
> > >  obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
> > >  obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
> > > +pcie-rcar-gen4-host-drv-objs := pcie-rcar-gen4.o pcie-rcar-gen4-host.o
> > > +obj-$(CONFIG_PCIE_RCAR_GEN4) += pcie-rcar-gen4-host-drv.o
> >
> > It'd be better to call the module as pcie-rcar-gen4-host and the file as
> > pcie-rcar-gen4-host-drv.c
> >
> > Also, move the goal definition first.
> >
> > >
> > >  # The following drivers are for devices that use the generic ACPI
> > >  # pci_root.c driver but don't support standard ECAM config access.
> > > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4-host.c b/drivers/pci/controller/dwc/pcie-rcar-gen4-host.c
> > > new file mode 100644
> > > index 000000000000..3168f5d98a79
> > > --- /dev/null
> > > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4-host.c
> > > @@ -0,0 +1,149 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * PCIe host controller driver for Renesas R-Car Gen4 Series SoCs
> > > + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> > > + */
> > > +
> > > +#include <linux/delay.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/pci.h>
> > > +#include <linux/platform_device.h>
> > > +
> > > +#include "pcie-rcar-gen4.h"
> > > +#include "pcie-designware.h"
> > > +
> > > +static int rcar_gen4_pcie_host_init(struct dw_pcie_rp *pp)
> > > +{
> > > +	struct dw_pcie *dw = to_dw_pcie_from_pp(pp);
> > > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > > +	int ret;
> > > +	u32 val;
> > > +
> > > +	gpiod_set_value_cansleep(dw->pe_rst, 1);
> > > +
> > > +	ret = clk_bulk_prepare_enable(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
> > > +	if (ret) {
> > > +		dev_err(dw->dev, "Failed to enable ref clocks\n");
> > > +		return ret;
> > > +	}
> > > +
> > > +	ret = rcar_gen4_pcie_basic_init(rcar);
> > > +	if (ret < 0) {
> >
> > Use "if (ret)" for consistency.
> >
> > > +		clk_bulk_disable_unprepare(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
> > > +		return ret;
> > > +	}
> > > +
> > > +	/*
> > > +	 * According to the section 3.5.7.2 "RC Mode" in DWC PCIe Dual Mode
> > > +	 * Rev.5.20a, we should disable two BARs to avoid unnecessary memory
> > > +	 * assignment during device enumeration.
> > > +	 */
> > > +	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_0, 0x0);
> > > +	dw_pcie_writel_dbi2(dw, PCI_BASE_ADDRESS_1, 0x0);
> > > +
> > > +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> >
> > Driver depends on PCI_MSI, so there is no need of this check.
> >
> > > +		/* Enable MSI interrupt signal */
> > > +		val = readl(rcar->base + PCIEINTSTS0EN);
> > > +		val |= MSI_CTRL_INT;
> > > +		writel(val, rcar->base + PCIEINTSTS0EN);
> > > +	}
> > > +
> > > +	msleep(100);	/* pe_rst requires 100msec delay */
> > > +
> > > +	gpiod_set_value_cansleep(dw->pe_rst, 0);
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static void rcar_gen4_pcie_host_deinit(struct dw_pcie_rp *pp)
> > > +{
> > > +	struct dw_pcie *dw = to_dw_pcie_from_pp(pp);
> > > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > > +
> > > +	gpiod_set_value_cansleep(dw->pe_rst, 1);
> > > +	rcar_gen4_pcie_basic_deinit(rcar);
> > > +	clk_bulk_disable_unprepare(DW_PCIE_NUM_CORE_CLKS, dw->core_clks);
> > > +}
> > > +
> > > +static const struct dw_pcie_host_ops rcar_gen4_pcie_host_ops = {
> > > +	.host_init = rcar_gen4_pcie_host_init,
> > > +	.host_deinit = rcar_gen4_pcie_host_deinit,
> > > +};
> > > +
> > > +static int rcar_gen4_add_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
> > > +{
> > > +	struct dw_pcie_rp *pp = &rcar->dw.pp;
> > > +
> > > +	pp->num_vectors = MAX_MSI_IRQS;
> > > +	pp->ops = &rcar_gen4_pcie_host_ops;
> > > +	rcar->mode = DW_PCIE_RC_TYPE;
> > > +
> > > +	return dw_pcie_host_init(pp);
> > > +}
> > > +
> > > +static void rcar_gen4_remove_dw_pcie_rp(struct rcar_gen4_pcie *rcar)
> > > +{
> > > +	dw_pcie_host_deinit(&rcar->dw.pp);
> > > +	gpiod_set_value_cansleep(rcar->dw.pe_rst, 1);
> > > +}
> > > +
> > > +static int rcar_gen4_pcie_probe(struct platform_device *pdev)
> > > +{
> > > +	struct device *dev = &pdev->dev;
> > > +	struct rcar_gen4_pcie *rcar;
> > > +	int err;
> > > +
> > > +	rcar = rcar_gen4_pcie_devm_alloc(pdev);
> > > +	if (!rcar)
> > > +		return -ENOMEM;
> > > +
> > > +	err = rcar_gen4_pcie_get_resources(rcar);
> 
> > > +	if (err < 0) {
> > > +		dev_err(dev, "Failed to request resource: %d\n", err);
> >
> > Use dev_err_probe().
> 
> Right. Can't believe I missed that and the error checks.
> 
> >
> > > +		return err;
> > > +	}
> > > +
> > > +	err = rcar_gen4_pcie_prepare(rcar);
> > > +	if (err < 0)
> > > +		return err;
> > > +
> 
> > > +	err = rcar_gen4_add_dw_pcie_rp(rcar);
> > > +	if (err < 0)
> > > +		goto err_add;
> > > +
> > > +	return 0;
> > > +
> > > +err_add:
> >
> > err_prepare
> 
> IMO either "err_unprepare" or "err_add_rp". First option seems better
> since unlike the second version it would look correct in case of
> having multiple gotos to the same label.
> 
> "err_prepare" doesn't indicate neither the target code nor the source
> of the jump. So the name doesn't sound descriptive if not to say
> misleading.

Thank you for your suggestion. I checked pcie-designware-{ep,host}.c and
it seems that the goto labels are:

err_{part_of_calling_function_name}:

For example:

err_stop_link:
        dw_pcie_stop_link(pci);

err_remove_edma:
        dw_pcie_edma_remove(pci);

So, err_unprepare: here is a good label, I think. I'll fix the label
on v19.

Best regards,
Yoshihiro Shimoda

> >
> > > +	rcar_gen4_pcie_unprepare(rcar);
> > > +
> > > +	return err;
> > > +}
> > > +
> > > +static void rcar_gen4_pcie_remove(struct platform_device *pdev)
> > > +{
> > > +	struct rcar_gen4_pcie *rcar = platform_get_drvdata(pdev);
> > > +
> > > +	rcar_gen4_remove_dw_pcie_rp(rcar);
> > > +	rcar_gen4_pcie_unprepare(rcar);
> > > +}
> > > +
> > > +static const struct of_device_id rcar_gen4_pcie_of_match[] = {
> > > +	{ .compatible = "renesas,rcar-gen4-pcie", },
> > > +	{},
> > > +};
> >
> > Missing MODULE_DEVICE_TABLE since this driver can be built as a module.
> >
> > > +
> > > +static struct platform_driver rcar_gen4_pcie_driver = {
> > > +	.driver = {
> > > +		.name = "pcie-rcar-gen4",
> > > +		.of_match_table = rcar_gen4_pcie_of_match,
> > > +		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
> > > +	},
> > > +	.probe = rcar_gen4_pcie_probe,
> > > +	.remove_new = rcar_gen4_pcie_remove,
> > > +};
> > > +module_platform_driver(rcar_gen4_pcie_driver);
> > > +
> > > +MODULE_DESCRIPTION("Renesas R-Car Gen4 PCIe host controller driver");
> > > +MODULE_LICENSE("GPL");
> > > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.c b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > > new file mode 100644
> > > index 000000000000..a5fb9aae0a6f
> > > --- /dev/null
> > > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.c
> > > @@ -0,0 +1,200 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * PCIe host/endpoint controller driver for Renesas R-Car Gen4 Series SoCs
> > > + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> > > + */
> > > +
> > > +#include <linux/delay.h>
> > > +#include <linux/io.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/pci.h>
> > > +#include <linux/pm_runtime.h>
> > > +#include <linux/reset.h>
> > > +
> > > +#include "pcie-rcar-gen4.h"
> > > +#include "pcie-designware.h"
> > > +
> > > +/* Renesas-specific */
> > > +#define PCIERSTCTRL1		0x0014
> > > +#define  APP_HOLD_PHY_RST	BIT(16)
> >
> > Spacing is not consistent.
> >
> > > +#define  APP_LTSSM_ENABLE	BIT(0)
> > > +
> > > +#define RCAR_NUM_SPEED_CHANGE_RETRIES	10
> > > +#define RCAR_MAX_LINK_SPEED		4
> > > +
> > > +static void rcar_gen4_pcie_ltssm_enable(struct rcar_gen4_pcie *rcar,
> > > +					bool enable)
> > > +{
> > > +	u32 val;
> > > +
> > > +	val = readl(rcar->base + PCIERSTCTRL1);
> > > +	if (enable) {
> > > +		val |= APP_LTSSM_ENABLE;
> > > +		val &= ~APP_HOLD_PHY_RST;
> > > +	} else {
> > > +		/*
> > > +		 * Since the datasheet of R-Car doesn't mention how to assert
> > > +		 * the APP_HOLD_PHY_RST, don't assert it again. Otherwise,
> > > +		 * hang-up issue happened in the dw_edma_core_off() when
> > > +		 * the controller didn't detect a PCI device.
> > > +		 */
> > > +		val &= ~APP_LTSSM_ENABLE;
> > > +	}
> > > +	writel(val, rcar->base + PCIERSTCTRL1);
> > > +}
> > > +
> > > +static int rcar_gen4_pcie_link_up(struct dw_pcie *dw)
> > > +{
> > > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > > +	u32 val, mask;
> > > +
> > > +	val = readl(rcar->base + PCIEINTSTS0);
> > > +	mask = RDLH_LINK_UP | SMLH_LINK_UP;
> > > +
> > > +	return (val & mask) == mask;
> > > +}
> > > +
> > > +static bool rcar_gen4_pcie_speed_change(struct dw_pcie *dw)
> >
> > It'd be good to add a comment for this function.
> >
> > > +{
> > > +	u32 val;
> > > +	int i;
> > > +
> > > +	val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
> > > +	val &= ~PORT_LOGIC_SPEED_CHANGE;
> > > +	dw_pcie_writel_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
> > > +
> > > +	val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
> > > +	val |= PORT_LOGIC_SPEED_CHANGE;
> > > +	dw_pcie_writel_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
> > > +
> > > +	for (i = 0; i < RCAR_NUM_SPEED_CHANGE_RETRIES; i++) {
> > > +		val = dw_pcie_readl_dbi(dw, PCIE_LINK_WIDTH_SPEED_CONTROL);
> > > +		if (!(val & PORT_LOGIC_SPEED_CHANGE))
> > > +			return true;
> > > +		usleep_range(10000, 11000);
> > > +	}
> > > +
> > > +	return false;
> > > +}
> > > +
> > > +static int rcar_gen4_pcie_start_link(struct dw_pcie *dw)
> >
> > For this one too.
> >
> > > +{
> > > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > > +	int i, changes;
> > > +
> > > +	rcar_gen4_pcie_ltssm_enable(rcar, true);
> > > +
> > > +	/*
> > > +	 * Require direct speed change with retrying here if the link_gen is
> > > +	 * PCIe Gen2 or higher.
> > > +	 */
> > > +	changes = min_not_zero(dw->link_gen, RCAR_MAX_LINK_SPEED) - 1;
> > > +
> > > +	/*
> > > +	 * Since dw_pcie_setup_rc() sets it once, PCIe Gen2 will be trained.
> > > +	 * So, this needs remaining times for up to PCIe Gen4 if RC mode.
> > > +	 */
> > > +	if (changes && rcar->mode == DW_PCIE_RC_TYPE)
> > > +		changes--;
> > > +
> > > +	for (i = 0; i < changes; i++) {
> > > +		if (!rcar_gen4_pcie_speed_change(dw))
> > > +			break;	/* No error because possible disconnected here if EP mode */
> > > +	}
> > > +
> > > +	return 0;
> > > +}
> > > +
> > > +static void rcar_gen4_pcie_stop_link(struct dw_pcie *dw)
> > > +{
> > > +	struct rcar_gen4_pcie *rcar = to_rcar_gen4_pcie(dw);
> > > +
> > > +	rcar_gen4_pcie_ltssm_enable(rcar, false);
> > > +}
> > > +
> > > +int rcar_gen4_pcie_basic_init(struct rcar_gen4_pcie *rcar)
> >
> > s/basic/common
> >
> > - Mani
> >
> > > +{
> > > +	struct dw_pcie *dw = &rcar->dw;
> > > +	u32 val;
> > > +
> > > +	if (!reset_control_status(dw->core_rsts[DW_PCIE_PWR_RST].rstc))
> > > +		reset_control_assert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
> > > +
> > > +	val = readl(rcar->base + PCIEMSR0);
> > > +	if (rcar->mode == DW_PCIE_RC_TYPE)
> > > +		val |= DEVICE_TYPE_RC;
> > > +	else if (rcar->mode == DW_PCIE_EP_TYPE)
> > > +		val |= DEVICE_TYPE_EP;
> > > +	else
> > > +		return -EINVAL;
> > > +
> > > +	if (dw->num_lanes < 4)
> > > +		val |= BIFUR_MOD_SET_ON;
> > > +
> > > +	writel(val, rcar->base + PCIEMSR0);
> > > +
> > > +	return reset_control_deassert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
> > > +}
> > > +
> > > +void rcar_gen4_pcie_basic_deinit(struct rcar_gen4_pcie *rcar)
> > > +{
> > > +	struct dw_pcie *dw = &rcar->dw;
> > > +
> > > +	reset_control_assert(dw->core_rsts[DW_PCIE_PWR_RST].rstc);
> > > +}
> > > +
> > > +int rcar_gen4_pcie_prepare(struct rcar_gen4_pcie *rcar)
> > > +{
> > > +	struct device *dev = rcar->dw.dev;
> > > +	int err;
> > > +
> > > +	pm_runtime_enable(dev);
> > > +	err = pm_runtime_resume_and_get(dev);
> > > +	if (err < 0) {
> > > +		dev_err(dev, "Failed to resume/get Runtime PM\n");
> > > +		pm_runtime_disable(dev);
> > > +	}
> > > +
> > > +	return err;
> > > +}
> > > +
> > > +void rcar_gen4_pcie_unprepare(struct rcar_gen4_pcie *rcar)
> > > +{
> > > +	struct device *dev = rcar->dw.dev;
> > > +
> > > +	pm_runtime_put(dev);
> > > +	pm_runtime_disable(dev);
> > > +}
> > > +
> > > +int rcar_gen4_pcie_get_resources(struct rcar_gen4_pcie *rcar)
> > > +{
> > > +	/* Renesas-specific registers */
> > > +	rcar->base = devm_platform_ioremap_resource_byname(rcar->pdev, "app");
> > > +
> 
> > > +	return IS_ERR(rcar->base) ? PTR_ERR(rcar->base) : 0;
> 
> This can be replaced with PTR_ERR_OR_ZERO().
> 
> > > +}
> > > +
> > > +static const struct dw_pcie_ops dw_pcie_ops = {
> > > +	.start_link = rcar_gen4_pcie_start_link,
> > > +	.stop_link = rcar_gen4_pcie_stop_link,
> > > +	.link_up = rcar_gen4_pcie_link_up,
> > > +};
> > > +
> > > +struct rcar_gen4_pcie *rcar_gen4_pcie_devm_alloc(struct platform_device *pdev)
> > > +{
> > > +	struct device *dev = &pdev->dev;
> > > +	struct rcar_gen4_pcie *rcar;
> > > +
> 
> > > +	rcar = devm_kzalloc(dev, sizeof(*rcar), GFP_KERNEL);
> > > +	if (!rcar)
> > > +		return NULL;
> 
> A better approach would be to return ERR_PTR(-ENOMEM) here and convert
> the method caller to performing "if (IS_ERR(rcar)) return
> PTR_ERR(rcar)". Thus in case if you decide to extend this method
> semantics with additional checks you won't need to update the caller
> and all the errors returned will be propagated up to the kernel
> device-driver subsystem.
> 
> -Serge(y)
> 
> > > +
> > > +	rcar->dw.dev = dev;
> > > +	rcar->dw.ops = &dw_pcie_ops;
> > > +	dw_pcie_cap_set(&rcar->dw, EDMA_UNROLL);
> > > +	dw_pcie_cap_set(&rcar->dw, REQ_RES);
> > > +	rcar->pdev = pdev;
> > > +	platform_set_drvdata(pdev, rcar);
> > > +
> > > +	return rcar;
> > > +}
> > > diff --git a/drivers/pci/controller/dwc/pcie-rcar-gen4.h b/drivers/pci/controller/dwc/pcie-rcar-gen4.h
> > > new file mode 100644
> > > index 000000000000..781165422739
> > > --- /dev/null
> > > +++ b/drivers/pci/controller/dwc/pcie-rcar-gen4.h
> > > @@ -0,0 +1,44 @@
> > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > +/*
> > > + * PCIe host/endpoint controller driver for Renesas R-Car Gen4 Series SoCs
> > > + * Copyright (C) 2022-2023 Renesas Electronics Corporation
> > > + */
> > > +
> > > +#ifndef _PCIE_RCAR_GEN4_H_
> > > +#define _PCIE_RCAR_GEN4_H_
> > > +
> > > +#include <linux/io.h>
> > > +#include <linux/pci.h>
> > > +
> > > +#include "pcie-designware.h"
> > > +
> > > +/* Renesas-specific */
> > > +#define PCIEMSR0		0x0000
> > > +#define  BIFUR_MOD_SET_ON	BIT(0)
> > > +#define  DEVICE_TYPE_EP		0
> > > +#define  DEVICE_TYPE_RC		BIT(4)
> > > +
> > > +#define PCIEINTSTS0		0x0084
> > > +#define PCIEINTSTS0EN		0x0310
> > > +#define  MSI_CTRL_INT		BIT(26)
> > > +#define  SMLH_LINK_UP		BIT(7)
> > > +#define  RDLH_LINK_UP		BIT(6)
> > > +#define PCIEDMAINTSTSEN		0x0314
> > > +#define  PCIEDMAINTSTSEN_INIT	GENMASK(15, 0)
> > > +
> > > +struct rcar_gen4_pcie {
> > > +	struct dw_pcie dw;
> > > +	void __iomem *base;
> > > +	struct platform_device *pdev;
> > > +	enum dw_pcie_device_mode mode;
> > > +};
> > > +#define to_rcar_gen4_pcie(_dw)	container_of(_dw, struct rcar_gen4_pcie, dw)
> > > +
> > > +int rcar_gen4_pcie_basic_init(struct rcar_gen4_pcie *rcar);
> > > +void rcar_gen4_pcie_basic_deinit(struct rcar_gen4_pcie *rcar);
> > > +int rcar_gen4_pcie_prepare(struct rcar_gen4_pcie *rcar);
> > > +void rcar_gen4_pcie_unprepare(struct rcar_gen4_pcie *rcar);
> > > +int rcar_gen4_pcie_get_resources(struct rcar_gen4_pcie *rcar);
> > > +struct rcar_gen4_pcie *rcar_gen4_pcie_devm_alloc(struct platform_device *pdev);
> > > +
> > > +#endif /* _PCIE_RCAR_GEN4_H_ */
> > > --
> > > 2.25.1
> > >
> >
> > --
> > மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux