Make the regulators required in the dt bindings. Despite the fact that the datasheet is not explicit enough, all the specifications of the part are built around these pins being supplied. Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> --- changes in v2: - improve commit description. .../devicetree/bindings/iio/frequency/adi,admv1014.yaml | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml index ab86daa2c56e..8e4c5ff0da14 100644 --- a/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml +++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv1014.yaml @@ -103,6 +103,14 @@ required: - clocks - clock-names - vcm-supply + - vcc-if-bb-supply + - vcc-vga-supply + - vcc-vva-supply + - vcc-lna-3p3-supply + - vcc-lna-1p5-supply + - vcc-bg-supply + - vcc-quad-supply + - vcc-mixer-supply allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml# -- 2.41.0
