Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 71 ++++++++++++---------------- 1 file changed, 30 insertions(+), 41 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 3d4050548f3a..ef7b6994fdab 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1198,8 +1198,8 @@ gcc: clock-controller@100000 { clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, - <&pcie0_lane>, - <&pcie1_lane>; + <&pcie0_phy>, + <&pcie1_phy>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", @@ -2371,7 +2371,7 @@ pcie0: pci@1c00000 { power-domains = <&gcc PCIE_0_GDSC>; - phys = <&pcie0_lane>; + phys = <&pcie0_phy>; phy-names = "pciephy"; status = "disabled"; @@ -2379,15 +2379,22 @@ pcie0: pci@1c00000 { pcie0_phy: phy@1c06000 { compatible = "qcom,sdm845-qmp-pcie-phy"; - reg = <0 0x01c06000 0 0x18c>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c06000 0 0x1000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_0_PHY_BCR>; reset-names = "phy"; @@ -2396,19 +2403,6 @@ pcie0_phy: phy@1c06000 { assigned-clock-rates = <100000000>; status = "disabled"; - - pcie0_lane: phy@1c06200 { - reg = <0 0x01c06200 0 0x128>, - <0 0x01c06400 0 0x1fc>, - <0 0x01c06800 0 0x218>, - <0 0x01c06600 0 0x70>; - clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_0_pipe_clk"; - }; }; pcie1: pci@1c08000 { @@ -2481,7 +2475,7 @@ pcie1: pci@1c08000 { power-domains = <&gcc PCIE_1_GDSC>; - phys = <&pcie1_lane>; + phys = <&pcie1_phy>; phy-names = "pciephy"; status = "disabled"; @@ -2489,15 +2483,22 @@ pcie1: pci@1c08000 { pcie1_phy: phy@1c0a000 { compatible = "qcom,sdm845-qhp-pcie-phy"; - reg = <0 0x01c0a000 0 0x800>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01c0a000 0 0x2000>; clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, <&gcc GCC_PCIE_1_CFG_AHB_CLK>, <&gcc GCC_PCIE_1_CLKREF_CLK>, - <&gcc GCC_PCIE_PHY_REFGEN_CLK>; - clock-names = "aux", "cfg_ahb", "ref", "refgen"; + <&gcc GCC_PCIE_PHY_REFGEN_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "ref", + "refgen", + "pipe"; + + clock-output-names = "pcie_1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; resets = <&gcc GCC_PCIE_1_PHY_BCR>; reset-names = "phy"; @@ -2506,18 +2507,6 @@ pcie1_phy: phy@1c0a000 { assigned-clock-rates = <100000000>; status = "disabled"; - - pcie1_lane: phy@1c06200 { - reg = <0 0x01c0a800 0 0x800>, - <0 0x01c0a800 0 0x800>, - <0 0x01c0b800 0 0x400>; - clocks = <&gcc GCC_PCIE_1_PIPE_CLK>; - clock-names = "pipe0"; - - #clock-cells = <0>; - #phy-cells = <0>; - clock-output-names = "pcie_1_pipe_clk"; - }; }; mem_noc: interconnect@1380000 { -- 2.39.2