[PATCH v2 08/13] arm64: dts: qcom: sc8180x: switch PCIe QMP PHY to new style of bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc8180x.dtsi | 140 ++++++++++----------------
 1 file changed, 51 insertions(+), 89 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index 486f7ffef43b..fae149e33b98 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -1749,7 +1749,7 @@ pcie0: pci@1c00000 {
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			phys = <&pcie0_lane>;
+			phys = <&pcie0_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
@@ -1757,15 +1757,20 @@ pcie0: pci@1c00000 {
 
 		pcie0_phy: phy-wrapper@1c06000 {
 			compatible = "qcom,sc8180x-qmp-pcie-phy";
-			reg = <0 0x1c06000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x1c06000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
 			reset-names = "phy";
@@ -1774,21 +1779,6 @@ pcie0_phy: phy-wrapper@1c06000 {
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie0_lane: phy@1c06200 {
-				reg = <0 0x1c06200 0 0x170>, /* tx0 */
-				      <0 0x1c06400 0 0x200>, /* rx0 */
-				      <0 0x1c06a00 0 0x1f0>, /* pcs */
-				      <0 0x1c06600 0 0x170>, /* tx1 */
-				      <0 0x1c06800 0 0x200>, /* rx1 */
-				      <0 0x1c06e00 0 0xf4>; /* pcs_com */
-				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_0_pipe_clk";
-				#phy-cells = <0>;
-			};
 		};
 
 		pcie3: pci@1c08000 {
@@ -1856,7 +1846,7 @@ pcie3: pci@1c08000 {
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			phys = <&pcie3_lane>;
+			phys = <&pcie3_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
@@ -1864,15 +1854,21 @@ pcie3: pci@1c08000 {
 
 		pcie3_phy: phy-wrapper@1c0c000 {
 			compatible = "qcom,sc8180x-qmp-pcie-phy";
-			reg = <0 0x1c0c000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x1c0c000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_3_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_3_CLKREF_CLK>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_3_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3_pipe_clk";
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_3_PHY_BCR>;
 			reset-names = "phy";
@@ -1881,21 +1877,6 @@ pcie3_phy: phy-wrapper@1c0c000 {
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie3_lane: phy@1c0c200 {
-				reg = <0 0x1c0c200 0 0x170>, /* tx0 */
-				      <0 0x1c0c400 0 0x200>, /* rx0 */
-				      <0 0x1c0ca00 0 0x1f0>, /* pcs */
-				      <0 0x1c0c600 0 0x170>, /* tx1 */
-				      <0 0x1c0c800 0 0x200>, /* rx1 */
-				      <0 0x1c0ce00 0 0xf4>; /* pcs_com */
-				clocks = <&gcc GCC_PCIE_3_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_3_pipe_clk";
-				#phy-cells = <0>;
-			};
 		};
 
 		pcie1: pci@1c10000 {
@@ -1963,7 +1944,7 @@ pcie1: pci@1c10000 {
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			phys = <&pcie1_lane>;
+			phys = <&pcie1_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
@@ -1971,15 +1952,21 @@ pcie1: pci@1c10000 {
 
 		pcie1_phy: phy-wrapper@1c16000 {
 			compatible = "qcom,sc8180x-qmp-pcie-phy";
-			reg = <0 0x1c16000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x1c16000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_1_CLKREF_CLK>,
-				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_1_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_1_pipe_clk";
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_1_PHY_BCR>;
 			reset-names = "phy";
@@ -1988,21 +1975,6 @@ pcie1_phy: phy-wrapper@1c16000 {
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie1_lane: phy@1c0e200 {
-				reg = <0 0x1c16200 0 0x170>, /* tx0 */
-				      <0 0x1c16400 0 0x200>, /* rx0 */
-				      <0 0x1c16a00 0 0x1f0>, /* pcs */
-				      <0 0x1c16600 0 0x170>, /* tx1 */
-				      <0 0x1c16800 0 0x200>, /* rx1 */
-				      <0 0x1c16e00 0 0xf4>; /* pcs_com */
-				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-				clock-names = "pipe0";
-				#clock-cells = <0>;
-				clock-output-names = "pcie_1_pipe_clk";
-
-				#phy-cells = <0>;
-			};
 		};
 
 		pcie2: pci@1c18000 {
@@ -2070,7 +2042,7 @@ pcie2: pci@1c18000 {
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
 			interconnect-names = "pcie-mem", "cpu-pcie";
 
-			phys = <&pcie2_lane>;
+			phys = <&pcie2_phy>;
 			phy-names = "pciephy";
 
 			status = "disabled";
@@ -2078,15 +2050,21 @@ pcie2: pci@1c18000 {
 
 		pcie2_phy: phy-wrapper@1c1c000 {
 			compatible = "qcom,sc8180x-qmp-pcie-phy";
-			reg = <0 0x1c1c000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x1c1c000 0 0x1000>;
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_2_CLKREF_CLK>,
-				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref", "refgen";
+				 <&gcc GCC_PCIE2_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_2_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+			#clock-cells = <0>;
+			clock-output-names = "pcie_3_pipe_clk";
+
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_PCIE_2_PHY_BCR>;
 			reset-names = "phy";
@@ -2095,22 +2073,6 @@ pcie2_phy: phy-wrapper@1c1c000 {
 			assigned-clock-rates = <100000000>;
 
 			status = "disabled";
-
-			pcie2_lane: phy@1c0e200 {
-				reg = <0 0x1c1c200 0 0x170>, /* tx0 */
-				      <0 0x1c1c400 0 0x200>, /* rx0 */
-				      <0 0x1c1ca00 0 0x1f0>, /* pcs */
-				      <0 0x1c1c600 0 0x170>, /* tx1 */
-				      <0 0x1c1c800 0 0x200>, /* rx1 */
-				      <0 0x1c1ce00 0 0xf4>; /* pcs_com */
-				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
-				clock-names = "pipe0";
-
-				#clock-cells = <0>;
-				clock-output-names = "pcie_2_pipe_clk";
-
-				#phy-cells = <0>;
-			};
 		};
 
 		ufs_mem_hc: ufshc@1d84000 {
-- 
2.39.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux