Change the PCIe QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 63 +++++++++++---------------- 1 file changed, 26 insertions(+), 37 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index 00ed71936b47..e4447a9d7929 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -211,59 +211,48 @@ qusb_phy_0: phy@79000 { pcie_qmp0: phy@84000 { compatible = "qcom,ipq8074-qmp-gen3-pcie-phy"; - reg = <0x00084000 0x1bc>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x00084000 0x1000>; clocks = <&gcc GCC_PCIE0_AUX_CLK>, - <&gcc GCC_PCIE0_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; + <&gcc GCC_PCIE0_AHB_CLK>, + <&gcc GCC_PCIE0_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; + + clock-output-names = "pcie20_phy0_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + resets = <&gcc GCC_PCIE0_PHY_BCR>, <&gcc GCC_PCIE0PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; - - pcie_phy0: phy@84200 { - reg = <0x84200 0x16c>, - <0x84400 0x200>, - <0x84800 0x1f0>, - <0x84c00 0xf4>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_PCIE0_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie20_phy0_pipe_clk"; - }; }; pcie_qmp1: phy@8e000 { compatible = "qcom,ipq8074-qmp-pcie-phy"; - reg = <0x0008e000 0x1c4>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + reg = <0x0008e000 0x1000>; clocks = <&gcc GCC_PCIE1_AUX_CLK>, - <&gcc GCC_PCIE1_AHB_CLK>; - clock-names = "aux", "cfg_ahb"; + <&gcc GCC_PCIE1_AHB_CLK>, + <&gcc GCC_PCIE1_PIPE_CLK>; + clock-names = "aux", + "cfg_ahb", + "pipe"; + + clock-output-names = "pcie20_phy1_pipe_clk"; + #clock-cells = <0>; + + #phy-cells = <0>; + resets = <&gcc GCC_PCIE1_PHY_BCR>, <&gcc GCC_PCIE1PHY_PHY_BCR>; reset-names = "phy", "common"; status = "disabled"; - - pcie_phy1: phy@8e200 { - reg = <0x8e200 0x130>, - <0x8e400 0x200>, - <0x8e800 0x1f8>; - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_PCIE1_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "pcie20_phy1_pipe_clk"; - }; }; mdio: mdio@90000 { @@ -807,7 +796,7 @@ pcie1: pci@10000000 { #address-cells = <3>; #size-cells = <2>; - phys = <&pcie_phy1>; + phys = <&pcie_qmp1>; phy-names = "pciephy"; ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ @@ -869,7 +858,7 @@ pcie0: pci@20000000 { #address-cells = <3>; #size-cells = <2>; - phys = <&pcie_phy0>; + phys = <&pcie_qmp0>; phy-names = "pciephy"; ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ -- 2.39.2