All platform devices of Loongson-1 was converted to devicetree.
Therefore, removes all the obsolete platform device related code,
header files and Kconfig options.
Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
---
arch/mips/include/asm/mach-loongson32/dma.h | 21 ---
arch/mips/include/asm/mach-loongson32/irq.h | 107 ---------------
.../include/asm/mach-loongson32/loongson1.h | 50 -------
arch/mips/include/asm/mach-loongson32/nand.h | 26 ----
.../include/asm/mach-loongson32/platform.h | 26 ----
.../include/asm/mach-loongson32/regs-mux.h | 124 ------------------
arch/mips/loongson32/Kconfig | 8 --
arch/mips/loongson32/Makefile | 13 --
arch/mips/loongson32/common/Makefile | 6 -
arch/mips/loongson32/common/platform.c | 17 ---
arch/mips/loongson32/ls1b/Makefile | 6 -
arch/mips/loongson32/ls1b/board.c | 24 ----
arch/mips/loongson32/ls1c/Makefile | 6 -
arch/mips/loongson32/ls1c/board.c | 17 ---
14 files changed, 451 deletions(-)
delete mode 100644 arch/mips/include/asm/mach-loongson32/dma.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/irq.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/loongson1.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/nand.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/platform.h
delete mode 100644 arch/mips/include/asm/mach-loongson32/regs-mux.h
delete mode 100644 arch/mips/loongson32/common/Makefile
delete mode 100644 arch/mips/loongson32/common/platform.c
delete mode 100644 arch/mips/loongson32/ls1b/Makefile
delete mode 100644 arch/mips/loongson32/ls1b/board.c
delete mode 100644 arch/mips/loongson32/ls1c/Makefile
delete mode 100644 arch/mips/loongson32/ls1c/board.c
diff --git a/arch/mips/include/asm/mach-loongson32/dma.h b/arch/mips/include/asm/mach-loongson32/dma.h
deleted file mode 100644
index e917b3ccb2c2..000000000000
--- a/arch/mips/include/asm/mach-loongson32/dma.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2015 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
- *
- * Loongson 1 NAND platform support.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_DMA_H
-#define __ASM_MACH_LOONGSON32_DMA_H
-
-#define LS1X_DMA_CHANNEL0 0
-#define LS1X_DMA_CHANNEL1 1
-#define LS1X_DMA_CHANNEL2 2
-
-struct plat_ls1x_dma {
- int nr_channels;
-};
-
-extern struct plat_ls1x_dma ls1b_dma_pdata;
-
-#endif /* __ASM_MACH_LOONGSON32_DMA_H */
diff --git a/arch/mips/include/asm/mach-loongson32/irq.h b/arch/mips/include/asm/mach-loongson32/irq.h
deleted file mode 100644
index 6115f025ba21..000000000000
--- a/arch/mips/include/asm/mach-loongson32/irq.h
+++ /dev/null
@@ -1,107 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
- *
- * IRQ mappings for Loongson 1
- */
-
-#ifndef __ASM_MACH_LOONGSON32_IRQ_H
-#define __ASM_MACH_LOONGSON32_IRQ_H
-
-/*
- * CPU core Interrupt Numbers
- */
-#define MIPS_CPU_IRQ_BASE 0
-#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x))
-
-#define SOFTINT0_IRQ MIPS_CPU_IRQ(0)
-#define SOFTINT1_IRQ MIPS_CPU_IRQ(1)
-#define INT0_IRQ MIPS_CPU_IRQ(2)
-#define INT1_IRQ MIPS_CPU_IRQ(3)
-#define INT2_IRQ MIPS_CPU_IRQ(4)
-#define INT3_IRQ MIPS_CPU_IRQ(5)
-#define INT4_IRQ MIPS_CPU_IRQ(6)
-#define TIMER_IRQ MIPS_CPU_IRQ(7) /* cpu timer */
-
-#define MIPS_CPU_IRQS (MIPS_CPU_IRQ(7) + 1 - MIPS_CPU_IRQ_BASE)
-
-/*
- * INT0~3 Interrupt Numbers
- */
-#define LS1X_IRQ_BASE MIPS_CPU_IRQS
-#define LS1X_IRQ(n, x) (LS1X_IRQ_BASE + (n << 5) + (x))
-
-#define LS1X_UART0_IRQ LS1X_IRQ(0, 2)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_UART1_IRQ LS1X_IRQ(0, 3)
-#define LS1X_UART2_IRQ LS1X_IRQ(0, 4)
-#define LS1X_UART3_IRQ LS1X_IRQ(0, 5)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_UART1_IRQ LS1X_IRQ(0, 4)
-#define LS1X_UART2_IRQ LS1X_IRQ(0, 5)
-#endif
-#define LS1X_CAN0_IRQ LS1X_IRQ(0, 6)
-#define LS1X_CAN1_IRQ LS1X_IRQ(0, 7)
-#define LS1X_SPI0_IRQ LS1X_IRQ(0, 8)
-#define LS1X_SPI1_IRQ LS1X_IRQ(0, 9)
-#define LS1X_AC97_IRQ LS1X_IRQ(0, 10)
-#define LS1X_DMA0_IRQ LS1X_IRQ(0, 13)
-#define LS1X_DMA1_IRQ LS1X_IRQ(0, 14)
-#define LS1X_DMA2_IRQ LS1X_IRQ(0, 15)
-#if defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_NAND_IRQ LS1X_IRQ(0, 16)
-#endif
-#define LS1X_PWM0_IRQ LS1X_IRQ(0, 17)
-#define LS1X_PWM1_IRQ LS1X_IRQ(0, 18)
-#define LS1X_PWM2_IRQ LS1X_IRQ(0, 19)
-#define LS1X_PWM3_IRQ LS1X_IRQ(0, 20)
-#define LS1X_RTC_INT0_IRQ LS1X_IRQ(0, 21)
-#define LS1X_RTC_INT1_IRQ LS1X_IRQ(0, 22)
-#define LS1X_RTC_INT2_IRQ LS1X_IRQ(0, 23)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_TOY_INT0_IRQ LS1X_IRQ(0, 24)
-#define LS1X_TOY_INT1_IRQ LS1X_IRQ(0, 25)
-#define LS1X_TOY_INT2_IRQ LS1X_IRQ(0, 26)
-#define LS1X_RTC_TICK_IRQ LS1X_IRQ(0, 27)
-#define LS1X_TOY_TICK_IRQ LS1X_IRQ(0, 28)
-#define LS1X_UART4_IRQ LS1X_IRQ(0, 29)
-#define LS1X_UART5_IRQ LS1X_IRQ(0, 30)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_UART3_IRQ LS1X_IRQ(0, 29)
-#define LS1X_ADC_IRQ LS1X_IRQ(0, 30)
-#define LS1X_SDIO_IRQ LS1X_IRQ(0, 31)
-#endif
-
-#define LS1X_EHCI_IRQ LS1X_IRQ(1, 0)
-#define LS1X_OHCI_IRQ LS1X_IRQ(1, 1)
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 2)
-#define LS1X_GMAC1_IRQ LS1X_IRQ(1, 3)
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define LS1X_OTG_IRQ LS1X_IRQ(1, 2)
-#define LS1X_GMAC0_IRQ LS1X_IRQ(1, 3)
-#define LS1X_CAM_IRQ LS1X_IRQ(1, 4)
-#define LS1X_UART4_IRQ LS1X_IRQ(1, 5)
-#define LS1X_UART5_IRQ LS1X_IRQ(1, 6)
-#define LS1X_UART6_IRQ LS1X_IRQ(1, 7)
-#define LS1X_UART7_IRQ LS1X_IRQ(1, 8)
-#define LS1X_UART8_IRQ LS1X_IRQ(1, 9)
-#define LS1X_UART9_IRQ LS1X_IRQ(1, 13)
-#define LS1X_UART10_IRQ LS1X_IRQ(1, 14)
-#define LS1X_UART11_IRQ LS1X_IRQ(1, 15)
-#define LS1X_I2C0_IRQ LS1X_IRQ(1, 17)
-#define LS1X_I2C1_IRQ LS1X_IRQ(1, 18)
-#define LS1X_I2C2_IRQ LS1X_IRQ(1, 19)
-#endif
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define INTN 4
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define INTN 5
-#endif
-
-#define LS1X_IRQS (LS1X_IRQ(INTN, 31) + 1 - LS1X_IRQ_BASE)
-
-#define NR_IRQS (MIPS_CPU_IRQS + LS1X_IRQS)
-
-#endif /* __ASM_MACH_LOONGSON32_IRQ_H */
diff --git a/arch/mips/include/asm/mach-loongson32/loongson1.h b/arch/mips/include/asm/mach-loongson32/loongson1.h
deleted file mode 100644
index 84f45461c832..000000000000
--- a/arch/mips/include/asm/mach-loongson32/loongson1.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
- *
- * Register mappings for Loongson 1
- */
-
-#ifndef __ASM_MACH_LOONGSON32_LOONGSON1_H
-#define __ASM_MACH_LOONGSON32_LOONGSON1_H
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-#define DEFAULT_MEMSIZE 64 /* If no memsize provided */
-#elif defined(CONFIG_LOONGSON1_LS1C)
-#define DEFAULT_MEMSIZE 32
-#endif
-
-/* Loongson 1 Register Bases */
-#define LS1X_MUX_BASE 0x1fd00420
-#define LS1X_INTC_BASE 0x1fd01040
-#define LS1X_GPIO0_BASE 0x1fd010c0
-#define LS1X_GPIO1_BASE 0x1fd010c4
-#define LS1X_DMAC_BASE 0x1fd01160
-#define LS1X_CBUS_BASE 0x1fd011c0
-#define LS1X_EHCI_BASE 0x1fe00000
-#define LS1X_OHCI_BASE 0x1fe08000
-#define LS1X_GMAC0_BASE 0x1fe10000
-#define LS1X_GMAC1_BASE 0x1fe20000
-
-#define LS1X_UART0_BASE 0x1fe40000
-#define LS1X_UART1_BASE 0x1fe44000
-#define LS1X_UART2_BASE 0x1fe48000
-#define LS1X_UART3_BASE 0x1fe4c000
-#define LS1X_CAN0_BASE 0x1fe50000
-#define LS1X_CAN1_BASE 0x1fe54000
-#define LS1X_I2C0_BASE 0x1fe58000
-#define LS1X_I2C1_BASE 0x1fe68000
-#define LS1X_I2C2_BASE 0x1fe70000
-#define LS1X_PWM0_BASE 0x1fe5c000
-#define LS1X_PWM1_BASE 0x1fe5c010
-#define LS1X_PWM2_BASE 0x1fe5c020
-#define LS1X_PWM3_BASE 0x1fe5c030
-#define LS1X_WDT_BASE 0x1fe5c060
-#define LS1X_RTC_BASE 0x1fe64000
-#define LS1X_AC97_BASE 0x1fe74000
-#define LS1X_NAND_BASE 0x1fe78000
-#define LS1X_CLK_BASE 0x1fe78030
-
-#include <regs-mux.h>
-
-#endif /* __ASM_MACH_LOONGSON32_LOONGSON1_H */
diff --git a/arch/mips/include/asm/mach-loongson32/nand.h b/arch/mips/include/asm/mach-loongson32/nand.h
deleted file mode 100644
index aaf5ed19d78d..000000000000
--- a/arch/mips/include/asm/mach-loongson32/nand.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2015 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
- *
- * Loongson 1 NAND platform support.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_NAND_H
-#define __ASM_MACH_LOONGSON32_NAND_H
-
-#include <linux/dmaengine.h>
-#include <linux/mtd/partitions.h>
-
-struct plat_ls1x_nand {
- struct mtd_partition *parts;
- unsigned int nr_parts;
-
- int hold_cycle;
- int wait_cycle;
-};
-
-extern struct plat_ls1x_nand ls1b_nand_pdata;
-
-bool ls1x_dma_filter_fn(struct dma_chan *chan, void *param);
-
-#endif /* __ASM_MACH_LOONGSON32_NAND_H */
diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h
deleted file mode 100644
index 2cdcfb5f6012..000000000000
--- a/arch/mips/include/asm/mach-loongson32/platform.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
- */
-
-#ifndef __ASM_MACH_LOONGSON32_PLATFORM_H
-#define __ASM_MACH_LOONGSON32_PLATFORM_H
-
-#include <linux/platform_device.h>
-
-#include <dma.h>
-#include <nand.h>
-
-extern struct platform_device ls1x_uart_pdev;
-extern struct platform_device ls1x_eth0_pdev;
-extern struct platform_device ls1x_eth1_pdev;
-extern struct platform_device ls1x_ehci_pdev;
-extern struct platform_device ls1x_gpio0_pdev;
-extern struct platform_device ls1x_gpio1_pdev;
-extern struct platform_device ls1x_rtc_pdev;
-extern struct platform_device ls1x_wdt_pdev;
-
-void __init ls1x_rtc_set_extclk(struct platform_device *pdev);
-void __init ls1x_serial_set_uartclk(struct platform_device *pdev);
-
-#endif /* __ASM_MACH_LOONGSON32_PLATFORM_H */
diff --git a/arch/mips/include/asm/mach-loongson32/regs-mux.h b/arch/mips/include/asm/mach-loongson32/regs-mux.h
deleted file mode 100644
index 95788a4f03a0..000000000000
--- a/arch/mips/include/asm/mach-loongson32/regs-mux.h
+++ /dev/null
@@ -1,124 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
- *
- * Loongson 1 MUX Register Definitions.
- */
-
-#ifndef __ASM_MACH_LOONGSON32_REGS_MUX_H
-#define __ASM_MACH_LOONGSON32_REGS_MUX_H
-
-#define LS1X_MUX_REG(x) \
- ((void __iomem *)KSEG1ADDR(LS1X_MUX_BASE + (x)))
-
-#define LS1X_MUX_CTRL0 LS1X_MUX_REG(0x0)
-#define LS1X_MUX_CTRL1 LS1X_MUX_REG(0x4)
-
-#if defined(CONFIG_LOONGSON1_LS1B)
-/* MUX CTRL0 Register Bits */
-#define UART0_USE_PWM23 BIT(28)
-#define UART0_USE_PWM01 BIT(27)
-#define UART1_USE_LCD0_5_6_11 BIT(26)
-#define I2C2_USE_CAN1 BIT(25)
-#define I2C1_USE_CAN0 BIT(24)
-#define NAND3_USE_UART5 BIT(23)
-#define NAND3_USE_UART4 BIT(22)
-#define NAND3_USE_UART1_DAT BIT(21)
-#define NAND3_USE_UART1_CTS BIT(20)
-#define NAND3_USE_PWM23 BIT(19)
-#define NAND3_USE_PWM01 BIT(18)
-#define NAND2_USE_UART5 BIT(17)
-#define NAND2_USE_UART4 BIT(16)
-#define NAND2_USE_UART1_DAT BIT(15)
-#define NAND2_USE_UART1_CTS BIT(14)
-#define NAND2_USE_PWM23 BIT(13)
-#define NAND2_USE_PWM01 BIT(12)
-#define NAND1_USE_UART5 BIT(11)
-#define NAND1_USE_UART4 BIT(10)
-#define NAND1_USE_UART1_DAT BIT(9)
-#define NAND1_USE_UART1_CTS BIT(8)
-#define NAND1_USE_PWM23 BIT(7)
-#define NAND1_USE_PWM01 BIT(6)
-#define GMAC1_USE_UART1 BIT(4)
-#define GMAC1_USE_UART0 BIT(3)
-#define LCD_USE_UART0_DAT BIT(2)
-#define LCD_USE_UART15 BIT(1)
-#define LCD_USE_UART0 BIT(0)
-
-/* MUX CTRL1 Register Bits */
-#define USB_RESET BIT(31)
-#define SPI1_CS_USE_PWM01 BIT(24)
-#define SPI1_USE_CAN BIT(23)
-#define DISABLE_DDR_CONFSPACE BIT(20)
-#define DDR32TO16EN BIT(16)
-#define GMAC1_SHUT BIT(13)
-#define GMAC0_SHUT BIT(12)
-#define USB_SHUT BIT(11)
-#define UART1_3_USE_CAN1 BIT(5)
-#define UART1_2_USE_CAN0 BIT(4)
-#define GMAC1_USE_TXCLK BIT(3)
-#define GMAC0_USE_TXCLK BIT(2)
-#define GMAC1_USE_PWM23 BIT(1)
-#define GMAC0_USE_PWM01 BIT(0)
-
-#elif defined(CONFIG_LOONGSON1_LS1C)
-
-/* SHUT_CTRL Register Bits */
-#define UART_SPLIT GENMASK(31, 30)
-#define OUTPUT_CLK GENMASK(29, 26)
-#define ADC_SHUT BIT(25)
-#define SDIO_SHUT BIT(24)
-#define DMA2_SHUT BIT(23)
-#define DMA1_SHUT BIT(22)
-#define DMA0_SHUT BIT(21)
-#define SPI1_SHUT BIT(20)
-#define SPI0_SHUT BIT(19)
-#define I2C2_SHUT BIT(18)
-#define I2C1_SHUT BIT(17)
-#define I2C0_SHUT BIT(16)
-#define AC97_SHUT BIT(15)
-#define I2S_SHUT BIT(14)
-#define UART3_SHUT BIT(13)
-#define UART2_SHUT BIT(12)
-#define UART1_SHUT BIT(11)
-#define UART0_SHUT BIT(10)
-#define CAN1_SHUT BIT(9)
-#define CAN0_SHUT BIT(8)
-#define ECC_SHUT BIT(7)
-#define GMAC_SHUT BIT(6)
-#define USBHOST_SHUT BIT(5)
-#define USBOTG_SHUT BIT(4)
-#define SDRAM_SHUT BIT(3)
-#define SRAM_SHUT BIT(2)
-#define CAM_SHUT BIT(1)
-#define LCD_SHUT BIT(0)
-
-#define UART_SPLIT_SHIFT 30
-#define OUTPUT_CLK_SHIFT 26
-
-/* MISC_CTRL Register Bits */
-#define USBHOST_RSTN BIT(31)
-#define PHY_INTF_SELI GENMASK(30, 28)
-#define AC97_EN BIT(25)
-#define SDIO_DMA_EN GENMASK(24, 23)
-#define ADC_DMA_EN BIT(22)
-#define SDIO_USE_SPI1 BIT(17)
-#define SDIO_USE_SPI0 BIT(16)
-#define SRAM_CTRL GENMASK(15, 0)
-
-#define PHY_INTF_SELI_SHIFT 28
-#define SDIO_DMA_EN_SHIFT 23
-#define SRAM_CTRL_SHIFT 0
-
-#define LS1X_CBUS_REG(n, x) \
- ((void __iomem *)KSEG1ADDR(LS1X_CBUS_BASE + (n * 0x04) + (x)))
-
-#define LS1X_CBUS_FIRST(n) LS1X_CBUS_REG(n, 0x00)
-#define LS1X_CBUS_SECOND(n) LS1X_CBUS_REG(n, 0x10)
-#define LS1X_CBUS_THIRD(n) LS1X_CBUS_REG(n, 0x20)
-#define LS1X_CBUS_FOURTHT(n) LS1X_CBUS_REG(n, 0x30)
-#define LS1X_CBUS_FIFTHT(n) LS1X_CBUS_REG(n, 0x40)
-
-#endif
-
-#endif /* __ASM_MACH_LOONGSON32_REGS_MUX_H */
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 75c1f4061700..22449d57f744 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -6,20 +6,12 @@ choice
config MACH_LSGZ_1B_DEV
bool "LSGZ 1B DEV board"
- select LOONGSON1_LS1B
help
Enable this to include the FDT for the LSGZ 1B DEV board.
config MACH_SMARTLOONG_1C
bool "Smartloong 1C board"
- select LOONGSON1_LS1C
help
Enable this to include the FDT for the Smartloong 1C board.
endchoice
-
-config LOONGSON1_LS1B
- bool
-
-config LOONGSON1_LS1C
- bool
diff --git a/arch/mips/loongson32/Makefile b/arch/mips/loongson32/Makefile
index 2d1b985dad71..53a97b2b8d77 100644
--- a/arch/mips/loongson32/Makefile
+++ b/arch/mips/loongson32/Makefile
@@ -4,16 +4,3 @@
#
obj-$(CONFIG_MACH_LOONGSON32) += init.o proc.o
-obj-$(CONFIG_MACH_LOONGSON32) += common/
-
-#
-# Loongson LS1B board
-#
-
-obj-$(CONFIG_LOONGSON1_LS1B) += ls1b/
-
-#
-# Loongson LS1C board
-#
-
-obj-$(CONFIG_LOONGSON1_LS1C) += ls1c/
diff --git a/arch/mips/loongson32/common/Makefile b/arch/mips/loongson32/common/Makefile
deleted file mode 100644
index 25e54b4fca7c..000000000000
--- a/arch/mips/loongson32/common/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for common code of loongson1 based machines.
-#
-
-obj-y += platform.o
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
deleted file mode 100644
index 9783c34f39b4..000000000000
--- a/arch/mips/loongson32/common/platform.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
- */
-
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sizes.h>
-#include <linux/usb/ehci_pdriver.h>
-
-#include <platform.h>
-#include <loongson1.h>
-#include <dma.h>
-#include <nand.h>
-#include <irq.h>
diff --git a/arch/mips/loongson32/ls1b/Makefile b/arch/mips/loongson32/ls1b/Makefile
deleted file mode 100644
index 33c574dc0f7f..000000000000
--- a/arch/mips/loongson32/ls1b/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for loongson1B based machines.
-#
-
-obj-y += board.o
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
deleted file mode 100644
index ff28f44fa687..000000000000
--- a/arch/mips/loongson32/ls1b/board.c
+++ /dev/null
@@ -1,24 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@xxxxxxxxx>
- */
-
-#include <linux/leds.h>
-#include <linux/mtd/partitions.h>
-#include <linux/sizes.h>
-
-#include <loongson1.h>
-#include <dma.h>
-#include <nand.h>
-#include <platform.h>
-
-static struct platform_device *ls1b_platform_devices[] __initdata = {
-};
-
-static int __init ls1b_platform_init(void)
-{
- return platform_add_devices(ls1b_platform_devices,
- ARRAY_SIZE(ls1b_platform_devices));
-}
-
-arch_initcall(ls1b_platform_init);
diff --git a/arch/mips/loongson32/ls1c/Makefile b/arch/mips/loongson32/ls1c/Makefile
deleted file mode 100644
index 1cf3aa264d55..000000000000
--- a/arch/mips/loongson32/ls1c/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for loongson1C based machines.
-#
-
-obj-y += board.o
diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
deleted file mode 100644
index e0b0eb94077e..000000000000
--- a/arch/mips/loongson32/ls1c/board.c
+++ /dev/null
@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (c) 2016 Yang Ling <gnaygnil@xxxxxxxxx>
- */
-
-#include <platform.h>
-
-static struct platform_device *ls1c_platform_devices[] __initdata = {
-};
-
-static int __init ls1c_platform_init(void)
-{
- return platform_add_devices(ls1c_platform_devices,
- ARRAY_SIZE(ls1c_platform_devices));
-}
-
-arch_initcall(ls1c_platform_init);
--
2.39.2
