Hi, I made those few adjustments that came up in the v2 review. Other than those, these are the same patches as before. The series is based on pinctrl-v3.19-1, the current pinctrl/devel branch. A branch with these changes is available at https://github.com/sorenb-xlnx/linux-xlnx/commits/pinctrl Thanks, Sören Soren Brinkmann (7): pinctrl: pinconf-generic: Infer map type from DT property pinctrl: pinconf-generic: Allow driver to specify DT params pinctrl: zynq: Document DT binding pinctrl: Add driver for Zynq ARM: zynq: Enable pinctrl ARM: zynq: DT: Add pinctrl information pinctrl: qcom-spmi-gpio: Migrate to pinconf-generic .../bindings/pinctrl/xlnx,zynq-pinctrl.txt | 104 ++ arch/arm/boot/dts/zynq-7000.dtsi | 8 +- arch/arm/boot/dts/zynq-zc702.dts | 181 +++ arch/arm/boot/dts/zynq-zc706.dts | 152 +++ arch/arm/mach-zynq/Kconfig | 2 + drivers/pinctrl/Kconfig | 8 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/nomadik/pinctrl-abx500.c | 2 +- drivers/pinctrl/pinconf-generic.c | 199 ++-- drivers/pinctrl/pinconf.c | 4 +- drivers/pinctrl/pinconf.h | 22 +- drivers/pinctrl/pinctrl-rockchip.c | 2 +- drivers/pinctrl/pinctrl-tz1090-pdc.c | 2 +- drivers/pinctrl/pinctrl-tz1090.c | 2 +- drivers/pinctrl/pinctrl-zynq.c | 1176 ++++++++++++++++++++ drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 125 +-- drivers/pinctrl/sh-pfc/pinctrl.c | 2 +- include/linux/pinctrl/pinconf-generic.h | 29 + include/linux/pinctrl/pinctrl.h | 9 + 19 files changed, 1808 insertions(+), 222 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/xlnx,zynq-pinctrl.txt create mode 100644 drivers/pinctrl/pinctrl-zynq.c -- 2.2.0.1.g9ee0458 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
