Add device tree file for SAM9X7 SoC family.
Co-developed-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Signed-off-by: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/microchip/sam9x7.dtsi | 1238 +++++++++++++++++++++++
1 file changed, 1238 insertions(+)
create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi
diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
new file mode 100644
index 000000000000..ee7f6dd14443
--- /dev/null
+++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
@@ -0,0 +1,1238 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
+ *
+ * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Varshini Rajendran <varshini.rajendran@xxxxxxxxxxxxx>
+ */
+
+#include <dt-bindings/clock/at91.h>
+#include <dt-bindings/dma/at91.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Microchip SAM9X7 SoC";
+ compatible = "microchip,sam9x7";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ gpio0 = &pioA;
+ gpio1 = &pioB;
+ gpio2 = &pioC;
+ gpio3 = &pioD;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,arm926ej-s";
+ device_type = "cpu";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ slow_xtal: clock-slowxtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+
+ main_xtal: clock-mainxtal {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ };
+ };
+
+ sram: sram@300000 {
+ compatible = "mmio-sram";
+ reg = <0x300000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x300000 0x10000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usb0: gadget@500000 {
+ compatible = "microchip,sam9x7-udc", "microchip,sam9x60-udc";
+ reg = <0x500000 0x100000>,
+ <0xf803c000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ clock-names = "pclk", "hclk";
+ assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ assigned-clock-rates = <480000000>;
+ status = "disabled";
+ };
+
+ ohci0: usb@600000 {
+ compatible = "microchip,sam9x7-ohci", "atmel,at91rm9200-ohci", "usb-ohci";
+ reg = <0x600000 0x100000>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
+ clock-names = "ohci_clk", "hclk", "uhpck";
+ status = "disabled";
+ };
+
+ ehci0: usb@700000 {
+ compatible = "microchip,sam9x7-ehci", "atmel,at91sam9g45-ehci", "usb-ehci";
+ reg = <0x700000 0x100000>;
+ interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
+ clock-names = "usb_clk", "ehci_clk";
+ assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ assigned-clock-rates = <480000000>;
+ status = "disabled";
+ };
+
+ sdmmc0: mmc@80000000 {
+ compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+ reg = <0x80000000 0x300>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
+ clock-names = "hclock", "multclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
+ assigned-clock-rates = <100000000>;
+ status = "disabled";
+ };
+
+ sdmmc1: mmc@90000000 {
+ compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
+ reg = <0x90000000 0x300>;
+ interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
+ clock-names = "hclock", "multclk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
+ assigned-clock-rates = <100000000>;
+ status = "disabled";
+ };
+ };
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ flx4: flexcom@f0000000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf0000000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0000000 0x800>;
+ status = "disabled";
+
+ uart4: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(8))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(9))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ spi4: spi@400 {
+ compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+ clock-names = "spi_clk";
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(8))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(9))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(8))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(9))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx5: flexcom@f0004000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf0004000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0004000 0x800>;
+ status = "disabled";
+
+ uart5: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(10))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(11))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ spi5: spi@400 {
+ compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+ clock-names = "spi_clk";
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(10))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(11))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(10))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(11))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ dma0: dma-controller@f0008000 {
+ compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
+ reg = <0xf0008000 0x1000>;
+ interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
+ #dma-cells = <1>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+ clock-names = "dma_clk";
+ status = "disabled";
+ };
+
+ ssc: ssc@f0010000 {
+ compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(38))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(39))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
+ clock-names = "pclk";
+ status = "disabled";
+ };
+
+ i2s: i2s@f001c000 {
+ compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
+ reg = <0xf001c000 0x100>;
+ interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(36))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(37))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ flx11: flexcom@f0020000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf0020000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0020000 0x800>;
+ status = "disabled";
+
+ uart11: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(22))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(23))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c11: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(22))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(23))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx12: flexcom@f0024000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf0024000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf0024000 0x800>;
+ status = "disabled";
+
+ uart12: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(24))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(25))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c12: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(24))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(25))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ pit64b0: timer@f0028000 {
+ compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+ reg = <0xf0028000 0x100>;
+ interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
+ clock-names = "pclk", "gclk";
+ };
+
+ sha: crypto@f002c000 {
+ compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
+ reg = <0xf002c000 0x100>;
+ interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(34))>;
+ dma-names = "tx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
+ clock-names = "sha_clk";
+ };
+
+ trng: rng@f0030000 {
+ compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
+ reg = <0xf0030000 0x100>;
+ interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
+ status = "disabled";
+ };
+
+ aes: crypto@f0034000 {
+ compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
+ reg = <0xf0034000 0x100>;
+ interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(32))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(33))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
+ clock-names = "aes_clk";
+ };
+
+ tdes: crypto@f0038000 {
+ compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
+ reg = <0xf0038000 0x100>;
+ interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(31))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(30))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
+ clock-names = "tdes_clk";
+ };
+
+ classd: classd@f003c000 {
+ compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
+ reg = <0xf003c000 0x100>;
+ interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(35))>;
+ dma-names = "tx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
+ clock-names = "pclk", "gclk";
+ status = "disabled";
+ };
+
+ pit64b1: timer@f0040000 {
+ compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
+ reg = <0xf0040000 0x100>;
+ interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
+ clock-names = "pclk", "gclk";
+ };
+
+ can0: can@f8000000 {
+ compatible = "bosch,m_can";
+ reg = <0xf8000000 0x100>, <0x300000 0x7800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0
+ 68 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
+ assigned-clock-rates = <480000000>, <40000000>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ can1: can@f8004000 {
+ compatible = "bosch,m_can";
+ reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0
+ 69 IRQ_TYPE_LEVEL_HIGH 0>;
+ interrupt-names = "int0", "int1";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
+ clock-names = "hclk", "cclk";
+ assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
+ assigned-clock-rates = <480000000>, <40000000>;
+ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
+ bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
+ status = "disabled";
+ };
+
+ tcb: timer@f8008000 {
+ compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
+ reg = <0xf8008000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
+ clock-names = "t0_clk", "gclk", "slow_clk";
+ status = "disabled";
+ };
+
+ flx6: flexcom@f8010000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf8010000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8010000 0x800>;
+ status = "disabled";
+
+ uart6: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(12))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(13))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c6: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(12))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(13))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx7: flexcom@f8014000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf8014000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8014000 0x800>;
+ status = "disabled";
+
+ uart7: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(14))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(15))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(14))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(15))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx8: flexcom@f8018000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf8018000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8018000 0x800>;
+ status = "disabled";
+
+ uart8: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(16))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(17))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(16))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(17))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx0: flexcom@f801c000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf801c000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf801c000 0x800>;
+ status = "disabled";
+
+ uart0: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(0))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(1))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ spi0: spi@400 {
+ compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+ clock-names = "spi_clk";
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(0))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(1))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(0))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(1))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx1: flexcom@f8020000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf8020000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8020000 0x800>;
+ status = "disabled";
+
+ uart1: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(2))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(3))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ spi1: spi@400 {
+ compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+ clock-names = "spi_clk";
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(2))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(3))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(2))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(3))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx2: flexcom@f8024000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf8024000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8024000 0x800>;
+ status = "disabled";
+
+ uart2: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(4))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(5))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ spi2: spi@400 {
+ compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+ clock-names = "spi_clk";
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(4))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(5))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(4))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(5))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx3: flexcom@f8028000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf8028000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8028000 0x800>;
+ status = "disabled";
+
+ uart3: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(6))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ spi3: spi@400 {
+ compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
+ reg = <0x400 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+ clock-names = "spi_clk";
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(6))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(6))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(7))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ gmac: ethernet@f802c000 {
+ compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem" ;
+ reg = <0xf802c000 0x1000>;
+ interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */
+ 60 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */
+ 61 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 2 */
+ 62 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 3 */
+ 63 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 4 */
+ 64 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 5 */
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
+ clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
+ assigned-clocks = <&pmc PMC_TYPE_GCK 67>;
+ status = "disabled";
+ };
+
+ flx9: flexcom@f8040000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf8040000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8040000 0x800>;
+ status = "disabled";
+
+ uart9: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(18))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(19))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(18))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(19))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ flx10: flexcom@f8044000 {
+ compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
+ reg = <0xf8044000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xf8044000 0x800>;
+ status = "disabled";
+
+ uart10: serial@200 {
+ compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
+ reg = <0x200 0x200>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(20))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(21))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@600 {
+ compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(20))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) |
+ AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(21))>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <16>;
+ status = "disabled";
+ };
+ };
+
+ sfr: sfr@f8050000 {
+ compatible = "microchip,sam9x7-sfr", "microchip,sam9x60-sfr", "syscon";
+ reg = <0xf8050000 0x100>;
+ };
+
+ matrix: matrix@ffffde00 {
+ compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
+ reg = <0xffffde00 0x200>;
+ };
+
+ pmecc: ecc-engine@ffffe000 {
+ compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
+ reg = <0xffffe000 0x300>,
+ <0xffffe600 0x100>;
+ };
+
+ mpddrc: mpddrc@ffffe800 {
+ compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
+ reg = <0xffffe800 0x200>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
+ clock-names = "ddrck", "mpddr";
+ };
+
+ smc: smc@ffffea00 {
+ compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
+ reg = <0xffffea00 0x100>;
+ };
+
+ aic: interrupt-controller@fffff100 {
+ compatible = "microchip,sam9x7-aic";
+ reg = <0xfffff100 0x100>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ atmel,external-irqs = <31>;
+ };
+
+ dbgu: serial@fffff200 {
+ compatible = "microchip,sam9x7-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+ interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
+ dmas = <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(28))>,
+ <&dma0
+ (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+ AT91_XDMAC_DT_PERID(29))>;
+ dma-names = "tx", "rx";
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
+ clock-names = "usart";
+ status = "disabled";
+ };
+
+ pinctrl: pinctrl@fffff400 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd";
+ ranges = <0xfffff400 0xfffff400 0x800>;
+
+ /* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */
+ atmel,mux-mask = <
+ /* A B C D */
+ 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000 /* pioA */
+ 0x07ffffff 0x0805fe7f 0x01ff9f80 0x06078000 /* pioB */
+ 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000 /* pioC */
+ 0x00003fff 0x00003fe0 0x0000003f 0x00000000 /* pioD */
+ >;
+
+ pioA: gpio@fffff400 {
+ compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff400 0x200>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
+ };
+
+ pioB: gpio@fffff600 {
+ compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff600 0x200>;
+ interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-lines = <26>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
+ };
+
+ pioC: gpio@fffff800 {
+ compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffff800 0x200>;
+ interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
+ };
+
+ pioD: gpio@fffffa00 {
+ compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfffffa00 0x200>;
+ interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #gpio-lines = <22>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
+ };
+ };
+
+ pmc: clock-controller@fffffc00 {
+ compatible = "microchip,sam9x7-pmc", "syscon";
+ reg = <0xfffffc00 0x200>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ #clock-cells = <2>;
+ clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
+ clock-names = "td_slck", "md_slck", "main_xtal";
+ };
+
+ reset_controller: reset-controller@fffffe00 {
+ compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc";
+ reg = <0xfffffe00 0x10>;
+ clocks = <&clk32k 0>;
+ };
+
+ power_management: power-management@fffffe10 {
+ compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc";
+ reg = <0xfffffe10 0x10>;
+ clocks = <&clk32k 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,wakeup-rtc-timer;
+ atmel,wakeup-rtt-timer;
+ status = "disabled";
+ };
+
+ rtt: rtc@fffffe20 {
+ compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt";
+ reg = <0xfffffe20 0x20>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k 0>;
+ };
+
+ clk32k: sckc@fffffe50 {
+ compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc";
+ reg = <0xfffffe50 0x4>;
+ clocks = <&slow_xtal>;
+ #clock-cells = <1>;
+ };
+
+ gpbr: syscon@fffffe60 {
+ compatible = "microchip,sam9x7-gbpr", "atmel,at91sam9260-gpbr", "syscon";
+ reg = <0xfffffe60 0x10>;
+ };
+
+ rtc: rtc@fffffea8 {
+ compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc";
+ reg = <0xfffffea8 0x100>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&clk32k 0>;
+ };
+
+ watchdog: watchdog@ffffff80 {
+ compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt";
+ reg = <0xffffff80 0x24>;
+ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+ status = "disabled";
+ };
+ };
+};
--
2.25.1
