On 7/27/2023 11:06 AM, Pavan Kondeti wrote:
On Thu, Jul 27, 2023 at 10:21:10AM +0530, Rohit Agarwal wrote:
Update the RPMHPD references with new bindings defined in rpmhpd.h
for Qualcomm SoCs SM8[2345]50.
Signed-off-by: Rohit Agarwal <quic_rohiagar@xxxxxxxxxxx>
---
Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml | 3 ++-
Documentation/devicetree/bindings/clock/qcom,sm8350-videocc.yaml | 3 ++-
Documentation/devicetree/bindings/clock/qcom,sm8450-camcc.yaml | 3 ++-
Documentation/devicetree/bindings/clock/qcom,sm8450-dispcc.yaml | 3 ++-
Documentation/devicetree/bindings/clock/qcom,sm8450-videocc.yaml | 3 ++-
Documentation/devicetree/bindings/clock/qcom,sm8550-dispcc.yaml | 3 ++-
Documentation/devicetree/bindings/clock/qcom,videocc.yaml | 3 ++-
Documentation/devicetree/bindings/display/msm/qcom,sm8250-dpu.yaml | 3 ++-
.../devicetree/bindings/display/msm/qcom,sm8250-mdss.yaml | 7 ++++---
Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml | 3 ++-
.../devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml | 5 +++--
Documentation/devicetree/bindings/display/msm/qcom,sm8450-dpu.yaml | 3 ++-
.../devicetree/bindings/display/msm/qcom,sm8450-mdss.yaml | 7 ++++---
Documentation/devicetree/bindings/display/msm/qcom,sm8550-dpu.yaml | 3 ++-
.../devicetree/bindings/display/msm/qcom,sm8550-mdss.yaml | 7 ++++---
Documentation/devicetree/bindings/media/qcom,sm8250-venus.yaml | 3 ++-
Documentation/devicetree/bindings/mmc/sdhci-msm.yaml | 3 ++-
Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml | 5 +++--
18 files changed, 44 insertions(+), 26 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index d6774db..d6b81c0 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -83,6 +83,7 @@ examples:
- |
#include <dt-bindings/clock/qcom,rpmh.h>
#include <dt-bindings/power/qcom-rpmpd.h>
+ #include <dt-bindings/power/qcom,rpmhpd.h>
clock-controller@af00000 {
compatible = "qcom,sm8250-dispcc";
reg = <0x0af00000 0x10000>;
@@ -103,7 +104,7 @@ examples:
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- power-domains = <&rpmhpd SM8250_MMCX>;
+ power-domains = <&rpmhpd RPMHPD_MMCX>;
required-opps = <&rpmhpd_opp_low_svs>;
};
...
Does this file still need to include old header? The same is applicable
to some of the other files in the patch also.
We also discussed on the other thread [1] to move the regulator level
definitions to new header. should this change be done after that, so that
we don't end up touching the very same files again?
[1]
https://lore.kernel.org/all/a4zztrn6jhblozdswba7psqtvjt5l765mfr3yl4llsm5gsyqef@7x6q7yabydvm/
Removing this header directly would also be fine as we are not using any
macro defined directly in these
bindings.
I already checked with dt_binding_check by removing this header.
Thanks,
Rohit.
