On 7/26/23 08:22, Carsten Spieß wrote:
Add dt-bindings for Renesase ISL28022 power monitor.
Signed-off-by: Carsten Spieß <mail@xxxxxxxxxxxxxxxxx>
---
.../bindings/hwmon/renesas,isl28022.yaml | 67 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
diff --git a/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml b/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
new file mode 100644
index 000000000000..5ecf892db269
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+
+$id: http://devicetree.org/schemas/hwmon/renesas,isl28022.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas ISL28022 power monitor
+
+maintainers:
+ - Carsten Spieß <mail@xxxxxxxxxxxxxxxxx>
+
+description: |
+ The ISL28022 is a power monitor with I2C interface. The device monitors
+ voltage, current via shunt resistor and calculated power.
+
+ Datasheets:
+ https://www.renesas.com/us/en/www/doc/datasheet/isl28022.pdf
+
+Required properties:
+ compatible:
+ enum:
+ - renesas,isl28022
+
+ reg:
+ maxItems: 1
+
+Optional properties:
+ shunt-resistor-micro-ohms:
+ description:
+ Shunt resistor value in micro-Ohm
+ defaults to <0> when not set
+ monitoring of current and power not supported when <0>
+
Should not default to 0 (disabled).
+ shunt-gain:
+ description:
+ Shunt gain to scale maximal shunt voltage to
+ 40mV, 80mV, 160mV, 320mV
+ defaults to <8> (320mV) when not set
+ enum: [1, 2, 4, 8]
+
+ average:
+ description: |
+ Number of samples to be used to report voltage, current and power values.
+ defaults to <0> when not set
+ enum: [0, 1, 2, 4, 8, 16, 32, 64, 128]
Should not default to 0 (disabled).
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ power-monitor@40 {
+ compatible = "renesas,isl28022";
+ reg = <0x10>;
+ shunt-resistor-micro-ohms = <8000>;
+ shunt-gain = <1>;
+ average = <128>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index c61aa688cd11..ec9b97ace50b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11076,6 +11076,7 @@ ISL28022 HARDWARE MONITORING DRIVER
M: Carsten Spieß <mail@xxxxxxxxxxxxxxxxx>
L: linux-hwmon@xxxxxxxxxxxxxxx
S: Maintained
+F: Documentation/devicetree/bindings/hwmon/renesas,isl28022.yaml
F: Documentation/hwmon/isl28022.rst
F: drivers/hwmon/isl28022.c
