The recommended name for enable GPIOs property in regulator-gpio is
"enable-gpios". This is also required by bindings:
r8a7740-armadillo800eva.dtb: regulator-vccq-sdhi0: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
index fa09295052c6..d21e00e1f401 100644
--- a/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
+++ b/arch/arm/boot/dts/renesas/r8a7740-armadillo800eva.dts
@@ -58,7 +58,7 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_sdhi0>;
- enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&pfc 74 GPIO_ACTIVE_HIGH>;
gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
states = <3300000 0>, <1800000 1>;
--
2.34.1
