The recommended name for enable GPIOs property in regulator-gpio is
enable-gpios. This is also required by bindings:
px30-engicam-px30-core-ctouch2.dtb: vcc3v3-btreg: Unevaluated properties are not allowed ('enable-gpio' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi | 2 +-
.../arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
index bf10a3d29fca..80db778c9684 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-ctouch2.dtsi
@@ -26,5 +26,5 @@ &sdio_pwrseq {
};
&vcc3v3_btreg {
- enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
index d759478e1c84..165d09ccb942 100644
--- a/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-engicam-px30-core-edimm2.2.dts
@@ -39,5 +39,5 @@ &sdio_pwrseq {
};
&vcc3v3_btreg {
- enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
};
--
2.34.1
