I2C6 and I2C7 use the same interrupts, which is incorrect.
In the downstream kernel, I2C7 has interrupts of 608 instead of 607.
Fixes: 81bee6953b58 ("arm64: dts: qcom: sm8150: add i2c nodes")
Signed-off-by: qaz6750 lzy <qaz6750@xxxxxxxxxxx>
---
[v2] Fixed issue of not using full name
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 837bdb574743..560b758b0a06 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1231,7 +1231,7 @@ i2c7: i2c@89c000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&qup_i2c7_default>;
- interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
--
2.34.1
