[PATCH v2] regulator: dt-bindings: dlg,slg51000: Convert to DT schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the bindings for Dialog Semiconductor SLG51000 Voltage Regulator
to DT schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

---

Changes in v2:
1. Mention that supplies are required, if the regulator is enabled.
---
 .../bindings/regulator/dlg,slg51000.yaml      | 132 ++++++++++++++++++
 .../bindings/regulator/slg51000.txt           |  88 ------------
 MAINTAINERS                                   |   2 +-
 3 files changed, 133 insertions(+), 89 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
 delete mode 100644 Documentation/devicetree/bindings/regulator/slg51000.txt

diff --git a/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
new file mode 100644
index 000000000000..0a901345ce33
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
@@ -0,0 +1,132 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/dlg,slg51000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog Semiconductor SLG51000 Voltage Regulator
+
+maintainers:
+  - Eric Jeong <eric.jeong.opensource@xxxxxxxxxxx>
+  - Support Opensource <support.opensource@xxxxxxxxxxx>
+
+properties:
+  compatible:
+    const: dlg,slg51000
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dlg,cs-gpios:
+    maxItems: 1
+    description:
+      GPIO for chip select
+
+  vin3-supply:
+    description:
+      Input supply for ldo3, required if regulatoris enabled
+
+  vin4-supply:
+    description:
+      Input supply for ldo4, required if regulatoris enabled
+
+  vin5-supply:
+    description:
+      Input supply for ldo5, required if regulatoris enabled
+
+  vin6-supply:
+    description:
+      Input supply for ldo6, required if regulatoris enabled
+
+  vin7-supply:
+    description:
+      Input supply for ldo7, required if regulatoris enabled
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      "^ldo[1-7]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          enable-gpios:
+            maxItems: 1
+
+        required:
+          - regulator-name
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/regulator/dlg,da9121-regulator.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@75 {
+            compatible = "dlg,slg51000";
+            reg = <0x75>;
+            dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;
+            vin5-supply = <&vreg_s1f_1p2>;
+            vin6-supply = <&vreg_s1f_1p2>;
+
+            regulators {
+                ldo1 {
+                    regulator-name = "slg51000_b_ldo1";
+                    regulator-min-microvolt = <2400000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                ldo2 {
+                    regulator-name = "slg51000_b_ldo2";
+                    regulator-min-microvolt = <2400000>;
+                    regulator-max-microvolt = <3300000>;
+                };
+
+                ldo3 {
+                    regulator-name = "slg51000_b_ldo3";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3750000>;
+                };
+
+                ldo4 {
+                    regulator-name = "slg51000_b_ldo4";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3750000>;
+                };
+
+                ldo5 {
+                    regulator-name = "slg51000_b_ldo5";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+
+                ldo6 {
+                    regulator-name = "slg51000_b_ldo6";
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <1200000>;
+                };
+
+                ldo7 {
+                    regulator-name = "slg51000_b_ldo7";
+                    regulator-min-microvolt = <1200000>;
+                    regulator-max-microvolt = <3750000>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/slg51000.txt b/Documentation/devicetree/bindings/regulator/slg51000.txt
deleted file mode 100644
index aa0733e49b90..000000000000
--- a/Documentation/devicetree/bindings/regulator/slg51000.txt
+++ /dev/null
@@ -1,88 +0,0 @@
-* Dialog Semiconductor SLG51000 Voltage Regulator
-
-Required properties:
-- compatible : Should be "dlg,slg51000" for SLG51000
-- reg : Specifies the I2C slave address.
-- xxx-supply: Input voltage supply regulator for ldo3 to ldo7.
-  These entries are required if regulators are enabled for a device.
-  An absence of these properties can cause the regulator registration to fail.
-  If some of input supply is powered through battery or always-on supply then
-  also it is required to have these parameters with proper node handle of always
-  on power supply.
-    vin3-supply: Input supply for ldo3
-    vin4-supply: Input supply for ldo4
-    vin5-supply: Input supply for ldo5
-    vin6-supply: Input supply for ldo6
-    vin7-supply: Input supply for ldo7
-
-Optional properties:
-- interrupt-parent : Specifies the reference to the interrupt controller.
-- interrupts : IRQ line information.
-- dlg,cs-gpios : Specify a valid GPIO for chip select
-
-Sub-nodes:
-- regulators : This node defines the settings for the regulators.
-  The content of the sub-node is defined by the standard binding
-  for regulators; see regulator.txt.
-
-  The SLG51000 regulators are bound using their names listed below:
-    ldo1
-    ldo2
-    ldo3
-    ldo4
-    ldo5
-    ldo6
-    ldo7
-
-Optional properties for regulators:
-- enable-gpios : Specify a valid GPIO for platform control of the regulator.
-
-Example:
-	pmic: slg51000@75 {
-		compatible = "dlg,slg51000";
-		reg = <0x75>;
-
-		regulators {
-			ldo1 {
-			        regulator-name = "ldo1";
-			        regulator-min-microvolt = <2400000>;
-			        regulator-max-microvolt = <3300000>;
-			};
-
-			ldo2 {
-			        regulator-name = "ldo2";
-			        regulator-min-microvolt = <2400000>;
-			        regulator-max-microvolt = <3300000>;
-			};
-
-			ldo3 {
-			        regulator-name = "ldo3";
-			        regulator-min-microvolt = <1200000>;
-			        regulator-max-microvolt = <3750000>;
-			};
-
-			ldo4 {
-			        regulator-name = "ldo4";
-			        regulator-min-microvolt = <1200000>;
-			        regulator-max-microvolt = <3750000>;
-			};
-
-			ldo5 {
-			        regulator-name = "ldo5";
-			        regulator-min-microvolt = <500000>;
-			        regulator-max-microvolt = <1200000>;
-			};
-
-			ldo6 {
-			        regulator-name = "ldo6";
-			        regulator-min-microvolt = <500000>;
-			        regulator-max-microvolt = <1200000>;
-			};
-
-			ldo7 {
-			        regulator-name = "ldo7";
-			        regulator-min-microvolt = <1200000>;
-			        regulator-max-microvolt = <3750000>;
-			};
-		};
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 1f2645d07b59..8955cf44fc81 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6039,7 +6039,7 @@ F:	Documentation/devicetree/bindings/mfd/da90*.txt
 F:	Documentation/devicetree/bindings/mfd/dlg,da90*.yaml
 F:	Documentation/devicetree/bindings/regulator/da92*.txt
 F:	Documentation/devicetree/bindings/regulator/dlg,da9*.yaml
-F:	Documentation/devicetree/bindings/regulator/slg51000.txt
+F:	Documentation/devicetree/bindings/regulator/dlg,slg51000.yaml
 F:	Documentation/devicetree/bindings/sound/da[79]*.txt
 F:	Documentation/devicetree/bindings/thermal/da90??-thermal.txt
 F:	Documentation/devicetree/bindings/watchdog/da90??-wdt.txt
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux