Re: [PATCH v4 6/6] arm64: dts: qcom: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am Montag, 24. Juli 2023, 12:39:13 CEST schrieb Alexander Stein:
> Use id-gpios and vbus-gpios instead.
> 
> Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
> Acked-by: Shawn Guo <shawnguo@xxxxxxxxxx>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---

>  arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi                 | 2 +-

sorry to be a spoilsport, but Rockchip is not part of qcom ;-) .

I don't have a massive problem with this going through the qcom tree
though, so if you don't respin,

Acked-by: Heiko Stuebner <heiko@xxxxxxxxx> #rockchip


> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> index aa3e21bd6c8f..20e3f41efe97 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> @@ -27,7 +27,7 @@ module_led: led-0 {
>  
>  	extcon_usb3: extcon-usb3 {
>  		compatible = "linux,extcon-usb-gpio";
> -		id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> +		id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
>  		pinctrl-names = "default";
>  		pinctrl-0 = <&usb3_id>;
>  	};
> 







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux