From: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx> On AM62x there are no hardware interrupts routed to A53 GIC interrupt controller for MCU MCAN IPs, so MCU MCAN nodes were omitted from MCU dtsi. Timer polling was introduced in commits [1][2] so now add MCU MCAN nodes to the MCU dtsi for Cortex A53. [1] b382380c0d2d ("can: m_can: Add hrtimer to generate software interrupt") [2] bb410c03b999 ("dt-bindings: net: can: Remove interrupt properties for MCAN") Once the MCU MCANs are added to the SOC dtsi, enable the Verdin CAN2. Hiago De Franco (1): arm64: dts: ti: k3-am625-verdin: enable CAN_2 Judith Mendez (1): arm64: dts: ti: k3-am62: Add MCU MCAN nodes arch/arm64/boot/dts/ti/k3-am62-mcu.dtsi | 24 +++++++++++++++++++ .../boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 5 ++++ .../arm64/boot/dts/ti/k3-am62-verdin-dev.dtsi | 5 ++++ .../boot/dts/ti/k3-am62-verdin-yavia.dtsi | 5 ++++ arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 19 +++++++++++++-- 5 files changed, 56 insertions(+), 2 deletions(-) -- 2.25.1