Re: [PATCH v1 8/9] PCI: PLDA: starfive: Add JH7110 PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2023/7/21 0:15, Bjorn Helgaas wrote:
> On Thu, Jul 20, 2023 at 06:11:59PM +0800, Kevin Xie wrote:
>> On 2023/7/20 0:48, Bjorn Helgaas wrote:
>> > On Wed, Jul 19, 2023 at 06:20:56PM +0800, Minda Chen wrote:
>> >> Add StarFive JH7110 SoC PCIe controller platform
>> >> driver codes.
> 
>> >> + * The BAR0/1 of bridge should be hidden during enumeration to
>> >> + * avoid the sizing and resource allocation by PCIe core.
>> >> + */
>> >> +static bool starfive_pcie_hide_rc_bar(struct pci_bus *bus, unsigned int  devfn,
>> >> +				      int offset)
>> >> +{
>> >> +	if (pci_is_root_bus(bus) && !devfn &&
>> >> +	    (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
>> >> +		return true;
>> >> +
>> >> +	return false;
>> >> +}
>> >> +
>> >> +int starfive_pcie_config_write(struct pci_bus *bus, unsigned int devfn,
>> >> +			       int where, int size, u32 value)
>> >> +{
>> >> +	if (starfive_pcie_hide_rc_bar(bus, devfn, where))
>> >> +		return PCIBIOS_BAD_REGISTER_NUMBER;
>> > 
>> > I think you are trying present BARs 0 & 1 as unimplemented.  Such BARs
>> > are hardwired to zero, so you should make them behave that way (both
>> > read and write).  Many callers of config accessors don't check the
>> > return value, so I don't think it's reliable to just return
>> > PCIBIOS_BAD_REGISTER_NUMBER.
>> 
>> This is a hardware defect that we did not hardwired those BARs to
>> zero, and it is configurable for software now.  We have to add this
>> filter function for workaround.
> 
> Yes.  My point is that this only affects the write path, and the read
> probably does not read 0 as it should.  This means lspci will show the
> wrong thing, and the PCI core will try to size the BAR when it doesn't
> need to.  I haven't looked at the BAR sizing code; it might even come
> up with a bogus size and address, when it *should* just conclude the
> BAR doesn't exist at all.
> 

Got it, I will try to hide those BARs both in read and write operations.

>> >> +	/* Ensure that PERST has been asserted for at least 100 ms */
>> >> +	msleep(300);
>> >> +	gpiod_set_value_cansleep(pcie->reset_gpio, 0);
>> > 
>> > At least 100 ms, but you sleep *300* ms?  This is probably related to
>> > https://lore.kernel.org/r/20230718155515.GA483233@bhelgaas
>> > 
>> > Please include a comment with the source of the delay value.  I assume
>> > it's T_PVPERL and T_PERST-CLK from the PCIe CEM spec.  This way we can
>> > someday share those #defines across drivers.
>> 
>> Yes, the delay value here is T_PVPERL from PCIe CEM spec r2.0 (Table
>> 2-4).  At the first time we set 100ms delay according to sector 2.2
>> of the spec: "After there has been time (TPVPERL) for the power and
>> clock to become stable, PERST# is deasserted high and the PCI
>> Express functions can start up."
>> 
>> However, in the compatibility testing with several NVMe SSD, we
>> found that Lenovo Thinklife ST8000 NVMe can not get ready in 100ms,
>> and it actually needs almost 200ms.  Thus, we increased the T_PVPERL
>> value to 300ms for the better device compatibility.
>>
>> We will use a macro to define T_PVPERL, and add comments for the
>> source of it.  If the compatibility delay of 300ms is not
>> reasonable, we can revert it to 100ms.
> 
> Thanks for this valuable information!  This NVMe issue potentially
> affects many similar drivers, and we may need a more generic fix so
> this device works well with all of them.
> 
> T_PVPERL is defined to start when power is stable.  Do you have a way
> to accurately determine that point?  I'm guessing this:
> 
>   gpiod_set_value_cansleep(pcie->power_gpio, 1)
> 
> turns the power on?  But of course that doesn't mean it is instantly
> stable.  Maybe your testing is telling you that your driver should
> have a hardware-specific 200ms delay to wait for power to become
> stable, followed by the standard 100ms for T_PVPERL?
> 

You are right, we did not take the power stable cost into account.
T_PVPERL is enough for Lenovo Thinklife ST8000 NVMe SSD to get ready,
and the extra cost is from the power circuit of a PCIe to M.2 connector,
which is used to verify M.2 SSD with our EVB at early stage.

As the Thinklife NVMe SSD may be a halted product,
and the onboard power circuit of VisionFive V2 is no problem,
we decided revert the sleep time to be 100ms.

We will add a comment for the source of T_PVPERL until your define in pci.h is accepted.

> Bjorn



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux