samsung,s3c6400-hsotg compatible is already fully covered in dwc2.yaml
bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
.../devicetree/bindings/usb/samsung-hsotg.txt | 38 -------------------
1 file changed, 38 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/samsung-hsotg.txt
diff --git a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt b/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
deleted file mode 100644
index 0388634598ce..000000000000
--- a/Documentation/devicetree/bindings/usb/samsung-hsotg.txt
+++ /dev/null
@@ -1,38 +0,0 @@
-Samsung High Speed USB OTG controller
------------------------------
-
-The Samsung HSOTG IP can be found on Samsung SoCs, from S3C6400 onwards.
-It gives functionality of OTG-compliant USB 2.0 host and device with
-support for USB 2.0 high-speed (480Mbps) and full-speed (12 Mbps)
-operation.
-
-Currently only device mode is supported.
-
-Binding details
------
-
-Required properties:
-- compatible: "samsung,s3c6400-hsotg" should be used for all currently
- supported SoC,
-- interrupts: specifier of interrupt signal of interrupt controller,
- according to bindings of interrupt controller,
-- clocks: contains an array of clock specifiers:
- - first entry: OTG clock
-- clock-names: contains array of clock names:
- - first entry: must be "otg"
-- vusb_d-supply: phandle to voltage regulator of digital section,
-- vusb_a-supply: phandle to voltage regulator of analog section.
-
-Example
------
-
- hsotg@12480000 {
- compatible = "samsung,s3c6400-hsotg";
- reg = <0x12480000 0x20000>;
- interrupts = <0 71 0>;
- clocks = <&clock 305>;
- clock-names = "otg";
- vusb_d-supply = <&vusb_reg>;
- vusb_a-supply = <&vusbdac_reg>;
- };
-
--
2.34.1
