From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> Add call to uart_get_rs485_mode() to probe for RS485 flags and properties from device tree. Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx> Reviewed-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx> Tested-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx> --- drivers/tty/serial/sc16is7xx.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 07ae889db296..49213be60baf 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1549,6 +1549,10 @@ static int sc16is7xx_probe(struct device *dev, goto out_ports; } + ret = uart_get_rs485_mode(&s->p[i].port); + if (ret) + goto out_ports; + /* Disable all interrupts */ sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0); /* Disable TX/RX */ -- 2.30.2
