Hi, thanks everyone for the feedback. This is the forth round of this series to add support for the TQMLS1021A using the MBLS1021A mainboard. Changes in v4: * Dropped display overlay for now as DCU patch is still pending * Rebase to next-20230721 * Move status property to last position * Rename stmpe811 node name * Remove superfluous #address-cells and #size-cells for stmpe811 * Add missing interrupt-controller properties for stmpe811 * Remove superfluous ESDHCI compatible overwrite in SoM .dtsi Best regards, Alexander Alexander Stein (2): ARM: dts: ls1021a: add TQ-Systems MBLS102xA device tree ARM: dts: ls1021a: add TQMLS1021A flash partition layout Matthias Schiffer (1): dt-bindings: arm: fsl: add TQ-Systems LS1021A board .../devicetree/bindings/arm/fsl.yaml | 10 + arch/arm/boot/dts/nxp/ls/Makefile | 1 + .../nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts | 405 ++++++++++++++++++ .../boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi | 111 +++++ 4 files changed, 527 insertions(+) create mode 100644 arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a.dts create mode 100644 arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi -- 2.34.1