IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsense node with nvmem cells for calibration data. Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx> --- [v5]: No changes. [v4]: No changes. [v3]: Reordered device nodes according to the address. [v2]: Included qfprom nodes only for available sensors and removed the offset suffix. arch/arm64/boot/dts/qcom/ipq5332.dtsi | 66 +++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi index 8bfc2db44624..026f99fda00c 100644 --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi @@ -150,6 +150,46 @@ qfprom: efuse@a4000 { reg = <0x000a4000 0x721>; #address-cells = <1>; #size-cells = <1>; + + s11: s11@3a5 { + reg = <0x3a5 0x1>; + bits = <4 4>; + }; + + s12: s12@3a6 { + reg = <0x3a6 0x1>; + bits = <0 4>; + }; + + s13: s13@3a6 { + reg = <0x3a6 0x1>; + bits = <4 4>; + }; + + s14: s14@3ad { + reg = <0x3ad 0x2>; + bits = <7 4>; + }; + + s15: s15@3ae { + reg = <0x3ae 0x1>; + bits = <3 4>; + }; + + tsens_mode: mode@3e1 { + reg = <0x3e1 0x1>; + bits = <0 3>; + }; + + tsens_base0: base0@3e1 { + reg = <0x3e1 0x2>; + bits = <3 10>; + }; + + tsens_base1: base1@3e2 { + reg = <0x3e2 0x2>; + bits = <5 10>; + }; }; rng: rng@e3000 { @@ -159,6 +199,32 @@ rng: rng@e3000 { clock-names = "core"; }; + tsens: thermal-sensor@4a9000 { + compatible = "qcom,ipq5332-tsens"; + reg = <0x4a9000 0x1000>, + <0x4a8000 0x1000>; + nvmem-cells = <&tsens_mode>, + <&tsens_base0>, + <&tsens_base1>, + <&s11>, + <&s12>, + <&s13>, + <&s14>, + <&s15>; + nvmem-cell-names = "mode", + "base0", + "base1", + "s11", + "s12", + "s13", + "s14", + "s15"; + interrupts = <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "combined"; + #qcom,sensors = <5>; + #thermal-sensor-cells = <1>; + }; + tlmm: pinctrl@1000000 { compatible = "qcom,ipq5332-tlmm"; reg = <0x01000000 0x300000>; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project