[PATCH v15 00/13] Add support for MT8195 SCP 2nd core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The mediatek remoteproc driver currently only allows bringing up a 
single core SCP, e.g. MT8183. It also only bringing up the 1st 
core in SoCs with a dual-core SCP, e.g. MT8195. This series support 
to bring-up the 2nd core of the dual-core SCP.

v15 -> v14:
1. Use the common SCP registers in struct mtk_scp_of_cluster instead of
   copy it to struct mtk_scp at patchset 5 
2. Use platform_set_drvdata instead of platform_device_add_data at patchset 5 
3. Rename l2tcm_lock to cluster_lock at patchset 8
4. Check l2tcm_refcnt value before decreasing at patchset 8
5. Revise the commit message at patchset 11

v13 -> v14:
1. add review tag to patchset 1,6
2. exchange the order of sram power on and reset assert in
mt8195_scp_c1_before_load at patchset 2
3. Use ERR_CAST in patchset 5
4. Re-write patchset 7 to remove dependency between core 0 and core 1 
5. Add patch set 10 to report watchdot timeout to all cores

v12 -> v13:
1. replace subdevice with new mediatek scp operations in patchset 7 
2. add review tag to patchset 3
3. modify mediatek,scp phandle name of video-codec@18000000 at patchset 11

v11 -> v12:
1. add scp_add_single/multi_core() to patchset 6
2. remove unused comment in patchset 6
3. rename list name from mtk_scp_cluster to mtk_scp_list
4. rewrite the multi-core probe flow 
5. disable rproc->autoboot and boot rproc by request_firmware_nowait at patchset 7 
6. remove patchset 7 review tag  

v10 -> v11:
1. rewrite patchset 5 to probe single-core SCP with the cluster list
2. Also in patchset 5, move the pointer of mtk_scp object from the
   platform data property to the driver data property 
3. move the appearance of mtk_scp cluster property to patcheset 7

v9 -> v10:
1. move the global mtk_scp list into the platform device driver data structure
2. remove an unnecessary if() condition

v8 -> v9:
1. initialize l1tcm_size/l1tcm_phys at patchset 05/11 
2. rewrite patchset 06/11 to unify the flow and remove hacks

v7 -> v8:
1. update the node name of mt8192 asurada SCP rpmsg subnode
2. squash register definitions into driver patches
3. initialize local variables on the declaration at patch v8 06/11 

v6 -> v7:
1. merge the mtk_scp_cluster struct into the mtk_scp structure
   at the "Probe multi-core SCP" patch

v5 -> v6:
1. move the mtk_scp_of_regs structure from mtk_common.h to mtk_scp.c
2. rename the SCP core 0 label from 'scp' to 'scp_c0'

v4 -> v5:
1. move resource release actions to the platform driver remove operation 
2. fix dual-core watchdog handling

v3 -> v4:
1. change the representation of dual-core SCP in dts file and update SCP yaml
2. rewrite SCP driver to reflect the change of dts node
3. drop 'remove redundant call of rproc_boot for SCP' in v3 for further investigation

v2 -> v3:
1. change the representation of dual-core SCP in dts file and update SCP yaml
2. rewrite SCP driver to reflect the change of dts node
3. add SCP core 1 node to mt8195.dtsi
4. remove redundant call of rproc_boot for SCP
5. refine IPI error message

v1 -> v2:
1. update dt-binding property description
2. remove kconfig for scp dual driver
3. merge mtk_scp_dual.c and mtk_scp_subdev.c to mtk_scp.c


Tinghan Shen (13):
  dt-bindings: remoteproc: mediatek: Improve the rpmsg subnode
    definition
  arm64: dts: mediatek: Update the node name of SCP rpmsg subnode
  dt-bindings: remoteproc: mediatek: Support MT8195 dual-core SCP
  remoteproc: mediatek: Add MT8195 SCP core 1 operations
  remoteproc: mediatek: Extract SCP common registers
  remoteproc: mediatek: Probe SCP cluster on single-core SCP
  remoteproc: mediatek: Probe SCP cluster on multi-core SCP
  remoteproc: mediatek: Remove dependency of MT8195 SCP L2TCM power
    control on dual-core SCP
  remoteproc: mediatek: Setup MT8195 SCP core 1 SRAM offset
  remoteproc: mediatek: Handle MT8195 SCP core 1 watchdog timeout
  remoteproc: mediatek: Report watchdog crash to all cores
  remoteproc: mediatek: Refine ipi handler error message
  arm64: dts: mediatek: mt8195: Add SCP 2nd core

 .../bindings/remoteproc/mtk,scp.yaml          | 176 +++++-
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi |   2 +-
 .../boot/dts/mediatek/mt8192-asurada.dtsi     |   2 +-
 .../boot/dts/mediatek/mt8195-cherry.dtsi      |   6 +-
 arch/arm64/boot/dts/mediatek/mt8195.dtsi      |  34 +-
 drivers/remoteproc/mtk_common.h               |  39 +-
 drivers/remoteproc/mtk_scp.c                  | 534 ++++++++++++++----
 drivers/remoteproc/mtk_scp_ipi.c              |   4 +-
 8 files changed, 651 insertions(+), 146 deletions(-)

-- 
2.18.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux