Re: [PATCH v5 2/5] gpio: gxp: Add HPE GXP GPIO PL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jul 5, 2023 at 9:49 PM <nick.hawkins@xxxxxxx> wrote:
>
> From: Nick Hawkins <nick.hawkins@xxxxxxx>
>
> The GXP SoC supports GPIO on multiple interfaces. The interfaces are
> CPLD and Host. The gpio-gxp-pl driver covers the CPLD which takes
> physical I/O from the board and shares it with GXP via a proprietary
> interface that maps the I/O onto a specific register area of the GXP.
> This driver supports interrupts from the CPLD.
>
> Signed-off-by: Nick Hawkins <nick.hawkins@xxxxxxx>
>

[snip]

> +
> +/*
> + * When an interrupt fires for a PSU config change
> + * there is a need to know the previous PSU configuration
> + * so that the appropriate gpio line is interrupted for
> + * the correct PSU. In order to keep this variable up to
> + * date it is global so that it can be set at init and
> + * each time the interrupt fires.
> + */
> +u8 psu_presence;

I'm not buying it. There's no user of this variable outside of this
compilation unit, is there? If there was - the name should have some
prefix but even then, I don't see a need for this to be global. Why
don't you put it in struct gxp_gpio_drvdata?

Bart

[snip]




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux